Specifications

10.6.2 2nd Feed Station
Main motor rotation is transmitted to the relay roller clutch gear [A] through
gears and a timing belt. The paper feed timing is controlled by the relay roller
clutch [B] and the 2nd feed clutch [C]. The relay roller gear [D] transmits
rotation to the 2nd feed clutch gear [E] through the relay gear [F] only when
the relay roller clutch is on (when the relay clutch solenoid [G] is energized).
Both the relay roller clutch and the 2nd paper feed clutch turn on at the same
time to start paper feed. The 2nd feed clutch is energized for 500
milliseconds to transfer drive to the 2nd feed roller shaft and turns the 2nd
feed rollers [H]. The 2nd feed rollers stop turning when the 2nd feed clutch
gear completes one rotation. The relay roller clutch solenoid stays energized
until the leading edge of the paper reaches the registration rollers.
[D]
[E]
[C]
[F]
[G]
[B]
[A]
[H]
1 December 1990
2-65