Specifications
Ia
Menu Screen
@ Turn on your TV and select the video channel.
@ Turn on the VCR. (See page 5, item 3.)
@
Press MENU to display the MENU screen.
@ Select the item you want by pressing
A
or
v
on the remote control. Refer to
the pages listed below for details on each item.
The following 6 items can be set by using the On Screen Display (OSD).
1: G-CODE Setting a G-CODE timer recording. (See page 26.)
.
.:SELECT
2: TIMER Setting a timer recording (and checking it), (See page
“EN”‘.EXIT
28 for the setting procedure.)
~~~-~,
3: MODE VCR operating conditions are
set according to the
broadcast reception and tape playback conditions. (See page 17.)
4: CHANNEL PRESET Setting the channels. (See page 13.)
5: CLOCK Setting the present time. (See page 12.)
6: LANGUAGE Selection of language to be used for the On Screen Display. (See page 11.)
@
Press SET. The screen changes to the item which you have selected.
@
To cancel the MENU screen, press MENU.
l During recording, the background colour of the MENU screen will become lighter. This does not indicate a malfunction.
l§i
OSD (On Screen Display)
The tape counter and VCR mode can be shown on the screen while you are playing back a tape or watching a
broadcast on the video channel.
“lJplay
GAalllp?
S.
PICTURE (New
Sham
Super
Picture)
/
AUDIO DUB (MIX) indicator
)
PLAY, X2
))
VSF
FF
4
(
VSR, REW
n
STOP, CASSETTE IN
11
)
F. ADV
II
b
slow
11
STILL
l
REC
l
II REC PAUSE
Programme channel
positlon
Audio System (STEREO/I/II)
Audio output indicator
Auto Fieoeat
disolav
Clock display
Calendar display
ea
lme
coun
er
l If the clock is not set, the time and date will not be displayed.
How to Display Indicators
0
Turn on your TV and select the video channel.
@
Turn on the VCR. Mode indicators are displayed
In
the AUTO display screen.
0
Each time MODE OSD is pressed, the screen changes as follows:
@ AUTO Display
----t
@ FULL Display
+
0
COUNTER Display
--c
@ Display off
f
~~~~
I
AUTO Display
When an each of the operation buttons, numeric button, or CHANNEL
A/v
(CH
A/r)
is pressed, the current
mode or the number of the channel will be displayed in the upper section of the TV screen for about 3 seconds.
l When you record a video signal output from this VCR on another VCR, press MODE OSD to select Display Off. (If the mode
indicator is displayed on the screen,
it
is also recorded on the tape )
16