Specifications
!!I
Simple Recording Timer
There are two ways to use this Simple Recording Timer for
l Immediate recordrng:
your convenience.
Convenient when
havrng
an unexpected visitor or
telephone call
l Delaved
recordina:
Immediate Recording
1
Convenrent
whenjeaving
the house or going to bed.
0
Select the channel position to be recorded by pressing
CHANNEL
A/V
(CH
A/7).
(fx.: Channel position: 2)
. REC
@ Press REC to enter the normal recording mode. Then,
press REC repeatedly to set the desired ending time.
(fx.: Ending time:
9:30
AM)
pisTir>
l
Each press of
REC
increases the stop time by
IO
minutes
l Press STOP to terminate recording
Delayed Recording
. REC
0
S.PTCT”RE
ON
8:10AM
STEREO
c!STANDBY
0
000
(
vcRi
)
0
Select the channel position to be recorded by pressing
CHANNEL
A/V
(CH
A/V).
(fx. : Channel position: 2)
@ Set the starting time by pressing
UTIME.
(Ex.: Starting
time:
8:40
AM)
pRiE>
l
Each press of
aTIME
Increases the start time by
10
minutes.
*Setting the time within a 24.hour period in IO-mrnute intervals is
possible.
@ Set the ending time by pressing REC.
(Ex.:
Ending time:
9:30
AM)
iNoTE
l Each press of REC increases the stop time by 10 minutes.
@
Press STANDBY to turn to the POWER STANDBY mode.
(See page 5, item 2.)
(Ex.: Present time:
8:28
AM)
*After the Simple Recording Timer is set, the channel position cannot be changed
*To
confirm the starting time and the ending time, first turn on the power Then press
DTIME
to confirm the starting and
ending time. And turn to the POWER STANDBY mode.
l To clear the Simple Recording
Tamer
setting during setting of “Delayed Recording”, press CLEAR on the remote control. TO
clear after
settrng,
turn on the power, press
BTIME
to select Simple Recording Timer mode, and then while the
aSTART
time is
flashrng,
press CLEAR.
l The Simple Recording Timer cannot be set
If
the
trmer
has been preset (“m’” indicator on the VCR display is lit). If this is the
case, cancel the timer standby mode by pressing TIMER ON/OFF, turn on the power and then proceed with setting of the
Simple Recording Timer.
l Select the SP (Standard Play) or LP (Long Play) recording speed with TAPE SPEED on the remote control
(“SP”
or “LP” will
light up on the VCR display). SP (Standard Play) gives the best picture quality. LP (Long Play) gives the largest recording
time.
l The stop time for delayed recording must be set within 10 seconds of setting the start time, otherwise start time must be set
again.
25