Specifications

m
New Child-Proof Lock
rl
With this feature, you can lock all VCR modes to prevent accidental change.
0
This function works even when the VCR power is off, thus preventing children
from operating the VCR or viewing select programmes while you are away from
home.
New Child-Proof Lock
0 Press ti on the remote control for about 2 seconds.
“ti” flashes and “;+---” lights on the VCR-function display.
Q Press ti again.
“&‘I remains lit on the VCR display confirming that New Child-Proof Lock has been activated.
@ Now regardless of what other operating buttons are touched, the VCR will continue to operate in the present
mode.
(If New Child-Proof Lock is activated during playback, once the tape reaches its end, the VCR automatically
rewinds the tape, ejects it, and turns into POWER STANDBY mode.)
Disengaging New Child-Proof Lock
l Press ti for about 2 seconds.
“ti” starts flashing and then disappears. Now, New Child-Proof Lock is disengaged
Advanced New Child-Proof Lock
0 Press ti on the remote control for about 2 seconds.
“h” flashes and “I<---” lights on the VCR display.
@ Input the personal code number (4 digit code) with the numbered buttons. The personal code number you
have input is displayed on the VCR display.
@ Press ti again.
“@%J” remains lit on the VCR display confirming that New Child-Proof Lock has been activated.
@ Now regardless of what other operating buttons are touched, the VCR will continue to operate in the present
mode.
(If New Child-Proof Lock is activated during playback, once the tape reaches its end, the VCR automatically
rewinds the tape, ejects it, and turns into POWER STANDBY mode.)
Disengaging Advanced New Child-Proof Lock
0 Press % for about 2 seconds.
“ti” flashes and “:+---” lights on the VCR drsplay.
@ Input the personal code number (4 digit code) you used to activate Advanced New Child-Proof Lock with
the numbered buttons. The personal code number you have input is displayed on the VCR display.
0 Press ti again.
“@&’ disappears. Now, New Child-Proof Lock is disengaged. If the code number is wrong, “:<---” is
displayed on the VCR display. Retry to input the right code number. Press G&I again.
If you forget your personal code number, you can disengage New Child-Proof Lock
with the following procedure:
0 Press ti for about 2 seconds.
“h” flashes and “;+:---” lights on the VCR display.
@ Press STANDBY on both the VCR and remote control (VCR STANBY for the remote control of VC-H690X)
for at least 2 seconds. New Child-Proof Lock is disengaged.
l If, while New Child-Proof Lock is on, you attempt to change modes by pressing another button, the “@FL” indicator will flash
on the VCR display
36