Specifications

Bl
VCR Display
When DISPLAY is pressed, the display changes in the following way. (However, the following is the case when
the clock time is set and displayed in the 12.hour system.)
Example: [TAPE COUNTER/CHANNEL]
Example, [TAPE REMAINING/CHANNEL]
+
Example:
5
[OPERATING MODE/CHANNEL]
4 Example. [PRESENT TIME/CHANNEL]
NoTE>
+ n
l During timer recording or Simple Recording Timer, the display shows the record finish time. When DISPLAY is pressed, the
display changes in the following way.
(If the “m” indicator on the VCR display is lit, cancel the timer standby mode by pressing TIMER ON/OFF and then turn on
the power.)
Fxamnle,
Example, [COUNTER]
[REMAINING TIME]
Example: [PRESENT TIME]
+
+
Example:
[RECORD FINISH TIME]
<
l During Simple Recording Timer recording, “0 lights
Counter Clear
Make sure the counter is displayed, then press CLEAR on the remote control.
“O:OO.OO” is displayed.
piiliTc>
l The counter will reset to “O:OO.OO” when the tape is rewound completely
37