Specifications

m
Editing from a Camcorder to Your VCR
Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information.
Jinals
12 or Ll
L2: (LINE IN 2) (Front)
LL
El
Specifications
Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan
Video signal system: PAL colour or monochrome signals: 625 lines
Hi-Fi audio recording system: Deep-layer recording system conforming to stereo Hi-Fi VHS standard
Maximum playing time: 480 min. with E-240 video cassette in LP mode
Tape width: 12.7 mm
Tape speed: 23.39 mm/set. SP; 11.70 mm/set. LP
Antenna: 75 Ohm unbalanced
Reception channels: VHF channel 0 to 12, UHF channel 28 to 69
RF output signal: UHF channel 28 to UHF channel 69 (preset to UHF channel 37)
Power requirement: AC 240 V, 50 Hz
Power consumption: VC-H670X: 16 W (approx.)/l .O W Max (at Low Power Mode)
VC-H690X: 17 W (approx.)/l .O W Max (at Low Power Mode)
Operating temperature: 5°C to 40°C
Storage temperature: - 20°C to 55°C
Video input: 1 .O Vp-p, 75 Ohm
output: 1 .O Vp-p, 75 Ohm
Audio input: (phono type) Line: -8dBs, 47 kohm
output: (phono type) Line: - 8dBs (approx.) , 1 kohm
Hi-Fi audio: Dynamic range: Typically 90 dB
Frequency response: 20 Hz-20 kHz
Wow and flutter: less than 0.005% Wrm
Dimensions: 360 (W) x 283.5 (D) x 93 (H) mm
Weight: 3.3 kg
Supplied accessories: R6 (AA, UMISUM-3) battery x2
75ohm coaxial cable, operation manual, remote control unit
Design and specifications are subject to change without notice.
39