Specifications
Using the Remote Control for TV Operation
The provided remote control can operate the basic functions of your television. In addition to most Sharp
televisions, other manufacturers’ televisions listed below can also be controlled by setting the remote control to
the corresponding TV brand. The remote control’s default brand is “SHARP”, which enables control of most
Sharp televisions. When you replace the batteries in the remote control, the control’s TV brand setting will be
reset to SHARP.
Setting the TV Brand
@ Turn on your TV.
@ From the table below select the button which
corresponds with the brand of your TV. Simultaneously
press both this button and (*) STANDBY/TV BRAND
SET. Hold down for more than one second.
When setting is complete, the remote control will send a
“power off” signal
(6)
to the TV, and it should turn off.
l If the TV does not turn off in step
0,
repeat the step @ setting
procedure and select the button for a different brand.
* STANDBY for VGH670X
TV BRAND SET for
VC-H69OX
(For example)
TV brand: SHARP
(Corresponding
button is “1
“)
Press these __
buttons simulta-
neously and hold
for more than 1
second.
Press these
buttons simulta-
neously and hold
for more than 1
second.
(VCH670X)
TV Functions to be Controlled
@My
for VC+67UX)
I
Switch
to
n,
control
moda,
’
“
L
Press TV
to
select
the
TV
control mode.
f;3
R&&I
to VCR
cufltrol~moda.
*
Pns?ss
VCR
to
&eGt the VCR
cantrui
mode;
1
._
N
functbn control
0
Press TV to select the
TV
cantrat
m&e.
@
Use the
fdlowing
buttons on your remote control to
INOTE>
l When you replace the batteries
in
the remote control, if your
operate your TV set.
television is not a Sharp model you must reset the TV brand.
TV
fttnctiun
l If MENU, PLAY, STOP, FF or REW are pressed in the TV
*TV
POWER
(($1
control mode, the VCR will return to VCR control mode.
‘TV CHANNEL
UP/DQWrJ
*TV
V~LU#vtE
UP~~~~~
IMPORTANT NOTE:
+
tNPtJT
SELECT
buttan
(TV-AV selector)
Although the provided remote control
unrt
is compatible
with most SHARP televisions, as well as many TV models
@
R&s
VCR
to
r&urn
to the VCR
mntrol
mode.
manufactured by others, it is possible that the provided
remote control will not work with vour TV, or will control
onlv some of the functions
(Uniy
for
VC44699X)
If the button listed in the table does not work with your TV
*YOU
GB?J
operate
TV
POWER
(81,
TV CHANNEL UP/
set, you may want to try another, occasionally, models
vary
wIthin
a brand.
DOWN, TV
VOLUNIE
UP/DOWN,
NPUT
SELECT
(TV-
Consequently, Sharp’s warranty does not cover all of the
AV selector) directly.
models under the brands listed in the table.
8