XE-A301 ELECTRONIC CASH REGISTER ELEKTRONISCHE REGISTRIERKASSE CAISSE ENREGISTREUSE ELECTRONIQUE CAJA REGISTRADORA ELECTRONICA ELEKTRONISCHE KASSA INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS MODEL MODELL MODELE MODELO MODEL XE-A301 MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
A301(Cover2-3) 03.4.24 7:33 PM Page C2 CAUTION: The cash register should be securely fitted to the supporting platforms to avoid instability when the drawer is open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. VORSICHT: Die Netzsteckdose muß nahe dem Gerät angebracht und leicht zugänglich sein. ATTENTION: La prise de courant murale devra être installée à proximité de l’équipement et devra être facilement accessible.
A301_1(En) 03.4.24 7:35 PM Page 1 English INTRODUCTION Thank you very much for your purchase of the SHARP Electronic Cash Register, Model XE-A301. Please read this manual carefully before operating your machine in order to gain full understanding of functions and features. Please keep this manual for future reference. It will help you if you encounter any operational problems. CAUTION! English Be sure to initialize the cash register before you start operating the cash register.
A301_1(En) 03.4.24 7:35 PM Page 2 CONTENTS INTRODUCTION ............................................................................................................................................1 IMPORTANT ..................................................................................................................................................1 PRECAUTION...............................................................................................................................................
A301_1(En) 03.4.24 7:35 PM Page 3 FOR THE MANAGER PRIOR TO PROGRAMMING ......................................................................................................................26 BASIC FUNCTION PROGRAMMING (For Quick Start) ............................................................................26 1 Date and Time Programming ..............................................................................................................26 2 Tax Programming ..................................
A301_1(En) 03.4.24 7:35 PM Page 4 PARTS AND THEIR FUNCTIONS 1 External View Front view Operator display Rear view Customer display (Pop-up type) Printer cover Receipt paper Journal window AC power cord Mode switch Drawer lock Keyboard Drawer 2 Printer The printer is a receipt/journal dual station type thermal printer, therefore it does not require any type of ink ribbon or cartridge. Lift the rear of the printer cover to remove. To re-install, hook the pawls on the cabinet and close.
A301_1(En) 03.4.24 7:35 PM Page 5 3 Mode Switch and Mode Keys The mode switch can be operated by inserting one of the two supplied mode keys - manager (MA) and operator (OP) keys. These keys can be inserted or removed only in the “REG” or “ ” position. Manager key (MA) MA Operator key (OP) OP The mode switch has these settings: : This mode locks all register operations. (AC power turns off.) No change occurs to register data.
A301_1(En) 03.4.24 7:35 PM Page 6 5 Displays Operator display Clerk code or mode name Function message display area Numeric entry display area Receipt OFF indicator Repeat / Sentinel mark / Power save mark • Clerk code or Mode name The mode you are in is displayed. When a clerk is assigned, the clerk code is displayed in the REG or OP X/Z mode. For example, “?01?” is displayed when clerk 01 is assigned.
A301_1(En) 03.4.24 7:35 PM Page 7 GETTING STARTED Please follow the procedure shown below. 1 Installing the cash register Unpack the cash register and make sure all accessories are included. For details of accessories, please refer to “Specifications” section. For installing the cash register, find a stable surface near an AC outlet where the cash register will not subject to water sources or direct sunlight, then install the register using the fixing angle bracket provided with the register.
A301_1(En) 03.4.24 7:35 PM 2 Page 8 Initializing the cash register In order for the cash register to operate properly, you must initialize it before operating for the first time. Follow this procedure. 1. Make sure the power cord plug is not inserted into the AC outlet. 2. Insert the manager (MA) key into the mode switch and turn it to the PGM OPX/Z position. REG MGR X1/Z1 X2/Z2 PGM 3. While holding down both the } key and the l key, insert the plug into the AC outlet.
A301_1(En) 03.4.24 7:35 PM 4 Page 9 Installing paper rolls Precaution: The paper cutter is mounted on the printer (receipt side). Take caution when installing paper rolls. The register can print receipts and journals. For the printer, you must install the paper rolls (receipt and journal paper rolls) provided with the register.
A301_1(En) 5 03.4.24 7:35 PM Page 10 Programming date, time and VAT/tax The cash register provides text languages of English, German, French and Spanish. It is preset to English. If you want to change the language, you must change it before programming. Refer to “Language selection” in “Various Function Selection Programming 2” section for changing the language.
A301_2(En) 03.4.24 7:37 PM Page 11 FOR THE OPERATOR BASIC SALES ENTRY 1 Basic Sales Entry Example Listed below is a basic sales entry example when selling items by cash. For operation details, please refer to each section. Mode switch setting REG OPX/Z MGR 1. Turn the mode switch to the REG position. X1/Z1 Clerk assignment X2/Z2 2. Enter your clerk code. (For example, clerk code is 1. Press the 1 and L key PGM in this order.
A301_2(En) 03.4.24 7:37 PM Page 12 Clerk assignment Prior to any item entries, clerks must enter their clerk codes into the register. However, the code entry may not be necessary when the same clerk handles the consecutive transactions. Clerk codes 1 to 4 can be assigned by default setting.
A301_2(En) 03.4.24 7:37 PM Page 13 3 Item Entries Single item entries 1. Department entries For a merchandise classification, the cash register provides a maximum of 99 departments. To the departments, group attributes such as taxable status are applied to items when they are entered. • When using the department keys (for department 1 to 40) For department 1 to 20, enter a unit price and press a department key. If you use a programmed unit price, press a department key only.
A301_2(En) 03.4.24 7:37 PM Page 14 • Subdepartment (open PLU) entries PLU code (1 to 1800) p Unit price * (max. 8 digits) Key operation example p * Less than the programmed upper limit amounts When zero is entered, only the sales quantity is added. Receipt print 1200 ∑ 500 D ¡ Department entry PLU entry Subdepartment entry ® D™ 50 d 1500 d 41 d 2p 11 p 1200 p A Repeat entries You can use this function for entering a sale of two or more of the same items.
A301_2(En) 03.4.24 7:37 PM Page 15 Multiplication entries When selling a large quantity of items, it is convenient to use the multiplication entry method. Enter quantity using numeric keys and press the @ key before starting item entry as shown in the example below. When programmed to allow fractional quantity entries, you can enter up to four integers and three digit decimal, though the quantity is counted as one for sales reports.
A301_2(En) 03.4.24 7:37 PM Page 16 Key operation example Department entry PLU entry Receipt print 7 @ 10 @ 600 ¶ 8 @ 12 @ 35 p A When Australian printing format is selected Single item cash sale (SICS) entry • This function is useful when a sale is for only one item and is for cash. This function is applicable only to those departments that have been set for SICS or to their associated PLUs or subdepartments.
A301_2(En) 03.4.24 7:37 PM Page 17 Cash tendering Key operation example Receipt print s 1000 A Cheque tendering Key operation example Receipt print s 1000 X Cash or cheque sale that does not require tender entry Enter items and press the A key if it is a cash sale or press a cheque key if it is a cheque sale. The register will display the total sale amount.
A301_2(En) 03.4.24 7:37 PM Page 18 Mixed-tender sale You can perform mixed-tendering of cheque and cash, cash and credit, and cheque and credit. Key operation example Receipt print s 950 A b 6 Computation of VAT (Value Added Tax)/tax VAT/ tax system The cash register may be programmed for the following six VAT/tax systems. The cash register is preprogrammed as automatic VAT 1-4 system.
A301_2(En) 03.4.24 7:37 PM Page 19 Automatic VAT 1 and automatic tax 2-4 system This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable 2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously programmed for these taxes.
A301_2(En) 03.4.24 7:37 PM Page 20 Deduction entries Your register allows you to deduct a preset amount or a certain amount manually entered, which are less than a programmed upper limit. These calculations can be after the entry of an item and/or the computation of subtotal depending on the programming. Deduction for subtotal Key operation example Receipt print 575 § 10 p ms 100 - A Deduction for item entries Key operation example Receipt print 675 ¶ A (When a deduction amount of 0.
A301_2(En) 03.4.24 7:37 PM Page 21 Non-add code number entries and printing You can enter a non-add code number such as a customer’s code number and credit card number, a maximum of 16 digits, at any point during the entry of a sale. The cash register will print it at once. To enter a non-add code number, enter the number and press the s key.
A301_2(En) 03.4.24 7:38 PM Page 22 Applying manual exchange rate Key operation example Exchange rate Receipt print 2300 § 4650 ¶ 1 P 275 V 10000 A Received-on account entries When you receive on account from a customer, use the r key. For the received-on-account (RA) entry, enter the amount, and press the r key. Cash tendering only available for RA operation. Key operation example Receipt print 12345 s 4800 r Paid-out entries When you pay an amount to a vendor, use the R key.
A301_2(En) 03.4.24 7:38 PM Page 23 Cashing a cheque When you need to cash a cheque, enter the cheque amount and press a cheque key (X or Y). Key operation example Receipt print 3000 X 3 Automatic Sequencing Key ([ ] keys) Entries You can achieve a programmed transaction simply by pressing the [ or ] key.
A301_2(En) 03.4.24 7:38 PM Page 24 2 Correction of the Next-to-last or Earlier Entry (indirect void) You can void any incorrect department entry, PLU/subdepartment entry or item refund entry made during a transaction if you find it before finalizing the transaction (e.g. pressing the A key). This function is applicable to department, PLU/subdepartment and refund entries only. Press the v key just before you press a department key, d key or p key.
A301_2(En) 03.4.24 7:38 PM Page 25 OVERLAPPED CLERK ENTRY This function allows you to switch from one clerk to another and to interrupt the first clerk’s entry. So the second clerk can do his or her entry in this mode. To use this function, please change the clerk system to “overlapped clerk” on the programming of job code 65. Please refer to “Other programming” of “Various Function Selection Programming 1” on page 47. • The overlapped clerk entry is not effective while the tendering sale is going on.
A301_3(En) 03.4.24 7:40 PM Page 26 FOR THE MANAGER PRIOR TO PROGRAMMING Before starting sales entries, you must first program necessary items so the cash register suits your sales needs. In this manual, there are three sections, BASIC FUNCTION PROGRAMMING where required items must be programmed, AUXILIARY FUNCTION PROGRAMMING where you can program for more convenient use of keys on the keyboard, and ADVANCED FUNCTION PROGRAMMING where various optional programming features are provided.
A301_3(En) 03.4.24 7:40 PM Page 27 Time For setting the time, enter the time in 4 digits using the 24-hour format. For example, when the time is set to 2:30 AM, enter 230; and when it is set to 2:30 PM, enter 1430. Time(max. 4 digits in 24-hour format) s Key operation example Print 1430 s Time In the display, current time is displayed in 24-hour format. If you want to display time in the 12-hour format, refer to “Various Function Selection Programming 1” section (Job code 61).
A301_3(En) 03.4.24 7:40 PM Page 28 Key operation example Print s9@ 2@ 4@ 12 s A • The lowest taxable amount is valid only when you select add on tax system. If you select VAT (Value added system), it is ignored. • If you make an incorrect entry before pressing the third @ key in programming a tax rate, cancel it with the l key. • You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do need to enter the decimal for fractions.
A301_3(En) 03.4.24 7:40 PM Page 29 Item: Selection: AB Group number C VAT 4 or tax 4 status D VAT 3 or tax 3 status E VAT 2 or tax 2 status F VAT 1 or tax 1 status G SICS / Normal H I Entry digit limit Type of unit price entry Entry: Positive normal dept. Negative normal dept. Positive hash dept. Negative hash dept.
A301_3(En) 03.4.24 7:40 PM Page 30 Key operation example Print 1000 ¡ A Unit price If a department is not programmed to allow the entry of preset unit prices in functional programming, the department is automatically changed to allow the entry of preset unit prices by this programming entry. 2 PLU (Price Look-Up) and Subdepartment Programming The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
A301_3(En) 03.4.
A301_3(En) 03.4.24 7:40 PM Page 32 Key operation example Print 10 P 25 0 P 939938 % V A Percent rate Currency exchange rate You must use a decimal point when setting fractional rates. Amount for To program zero Discount amount (max. six digits) - Key operation example A Print A 200 Discount amount Percent rate limitation for % and & You can program the upper limit of percent rates for percent entries. To program zero s 29 @ Percentage limit (0.00 -100.
A301_3(En) 03.4.24 7:40 PM Page 33 Function parameters for %, & and To program “0” for all items @ *ABCD % & or A To program for another key *: Item: Selection: A +/- sign B Item % / Item _ C Subtotal % / Subtotal _ D Entry digit limit for discount key Entry: + (premium) sign - (discount) sign* Allow* Disallow Allow* Disallow 0 1 0 1 0 1 0-8 (default:8) When programming for percent keys, always enter 0 for D.
A301_3(En) 03.4.24 7:40 PM Page 34 Function parameters for r, R, X, Y, c, b and A (when using as TL key) To program “0” for all items 1 * ABC @ To program for another key *2 s, X, Y, c, b, r R *2:Press s key for TL key setting.
A301_3(En) 03.4.24 7:40 PM Page 35 4 Text Programming The register allows you to program text for clerk names, department item names, PLU/subdepartment item names, if necessary. There are two ways for programming text: using character keys on the keyboard or entering character codes with numeric keys on the keyboard. Using character keys on the keyboard You can enter characters according to the small figures printed in the lower right position of the tops.
A301_3(En) 03.4.24 7:40 PM Page 36 Entering character codes with numeric keys on the keyboard Numerals, letters and symbols are programmable by entering the character code and the : key. (If numeric characters entry is selected, “1” is displayed on the operator display (lower line). Press the N key to release it.) Set the alphanumeric character code table on the next page. By doing this, you can program characters other than those on the key tops.
A301_3(En) 03.4.
A301_3(En) 03.4.24 7:40 PM Page 38 Department text (item label) (16 digits) * s 1 P D To keep current setting Dept. key Dept. code (1 to 99) Character keys (max.16 digits) s A d To program another dept. *To program departments 21 through 40, press the department shift key. Key operation example Print s1P ¡ FRUIT s A Text programmed for dept. 1 (Programming FRUIT for dept.1) PLU text (item label) (16 digits) To keep current setting s 2 P PLU code (1 to 1800) p Character keys (max.
A301_3(En) 03.4.24 7:40 PM Page 39 Function text (12 digits) To keep the current setting s 3 P *Function no. (max. 2 digits) @ Character keys (max. 12 digits) s A To program another function text * Function no.: See “List of function texts” shown on the next page.
A301_3(En) 03.4.24 7:40 PM Page 40 List of function texts Function no. 40 Key or function 1 _ 2 %1 3 %2 4 Default setting Function no. Key or function Default setting 45 Change for cheque CHK/CG 46 Domestic currency 1 DOM.CUR1 47 Domestic currency 2 DOM.CUR2 Net 1 (–) %1 %2 NET1 48 Dom. currency for EX cheque DOM.CUR1 5 Differ DIFFER 49 Dom.
A301_3(En) 03.4.24 7:40 PM Page 41 Clerk names (12 digits) To keep current setting s 5 P Clerk no. (1-20) @ Character keys (max. 12 digits) s A To program another clerk Key operation example Print s5P 1@ DAVID s A Logo messages (6 lines and 24 digits for each line) The register can print programmed messages on every receipt. On the standard model, a 6-line logo message is printed on the receipt. If you want to print in other logo message format, please change the format.
A301_3(En) 03.4.24 7:40 PM Page 42 To print the logo message “THANK YOU” using double sized characters and centering on the third line. Key operation example Print s4P 3@ SSS W THANK S YOU W SSS sA A 6-line logo message is preprogrammed when shipped. Please start entering from the first line when you first program a logo message. Foreign currency symbol (4 digits) Foreign currency symbol for the V key is printed with a foreign currency exchange amount obtained using a preset rate.
A301_3(En) 03.4.24 7:40 PM Page 43 Training mode text (12 digits) For every receipts issued in the training mode, **TRAINING** is printed by default. When you want to change the text, follow the procedure below. To keep the current setting s 87 P Character keys (max. 12 digits) Key operation example s A Print s 87 P S S TRAINING S S sA The programmed text is printed in double-size characters on the receipts issued in the training mode.
A301_3(En) 03.4.24 7:40 PM Page 44 2 Various Function Selection Programming 1 The cash register provides various detailed functions listed below. • Function selection for miscellaneous keys • Print format • Receipt print format • Others For this programming, the job code entry style is applied. You can continue programming until you press the A key for the programming described in this section. To continue programming, repeat from a job code entry.
A301_3(En) 03.4.24 7:40 PM Page 45 Print format Job code: 6 * Item: Selection: A B Always enter 0. Journal print item selection C Time print on receipts/journals D Date print on receipts/journals E Consecutive no.
A301_3(En) 03.4.24 7:40 PM Page 46 Other programming Job code: 61 * Item: Selection: A B C Always enter 0. Always enter 0. Negative dept. and PLU/subdept.
A301_3(En) 03.4.
A301_3(En) 03.4.
A301_3(En) 03.4.24 7:40 PM Page 49 Job code: 69 * Item: Selection: A B C D Always enter 0. Always enter 0. Always enter 1.
A301_3(En) 03.4.24 7:40 PM Page 50 Power save mode s 10 * Item: A B-D @ *ABCD s A Selection: Entering power save mode when time is displayed Time(min.) to entering power save mode since no operation is made Entry: Yes* No 0 1 001-254 or 999 (Default 030) When 999 is set for B to D, entering into power save mode is inhibited.
A301_3(En) 03.4.24 7:40 PM Page 51 Clerk code assignment s 16 @ Clerk no. (1 to 20) @ Clerk code (00 to 99)* s A * 00 : Disallows to use the clerk. Key operation example Print s 16 @ 20 @ 99 s A Entry digit limit for cash in drawer (CID) (sentinel) s 20 @ Entry digit limit for CID (max. 9 digits) Key operation example s A Print s 20 @ 9999 s A Entry digit limit for cheque cashing s 21 @ Entry digit limit for cheque cashing (max.
A301_3(En) 03.4.24 7:40 PM Page 52 Thermal printer density To set “0” s 50 @ *Printer density s A (00-99) * By default, 50 is set. To make the print darker, set a larger number, and to make the print lighter, set a smaller number. Key operation example Print s 50 @ 70 s A Language selection To set “0” s 88 *Language: 0: English 1: German By default, English is set.
A301_3(En) 03.4.24 7:40 PM Page 53 AUTO key programming — Automatic sequencing key If you program frequently performed transactions or report sequences for the [ and ] key, you can call those transactions and/or reports simply by pressing the [ or ] key in key operations. Delete [ ] Transaction (key entry) or [ ] or A max. 25 times Programming for [; entering a PLU 2 item and a dept. 6 item (unit price: 1.
A301_4(En) 03.4.24 7:42 PM Page 54 4 EURO Programming For details of EURO migration operation, please refer to “EURO MIGRATION FUNCTION”. EURO system settings To set “0” for all items s 8 * Item: A B C D @ s A *ABCD Selection: Printing exchange total amount and change amount on receipt/journal Always enter 0.
A301_4(En) 03.4.24 7:42 PM Page 55 Date setting for EURO modification operation To set all zeros s 13 @ Date (Day-Month-Year) (seven or eight digits) Key operation example s A Print s 13 @ s A 01072005 • In case you changed the date format using job code 61, follow the format you selected for setting the date. • If all zeros are set, this programming is disabled.
A301_4(En) 03.4.24 7:42 PM Page 56 5 Reading Stored Programs The machine allows you to read every program stored in the PGM mode. Key sequence for reading stored program Report name Key sequence Printer density programming report A 4 2 1 3 PLU programming report Start PLU code Programming report 1 Department programming report Programming report 2 Auto key programming report A A A A @ End PLU code p To stop reading programming report, turn the mode switch to the MGR position.
A301_4(En) 03.4.24 7:42 PM Page 57 3 Programming report 2 5 Printer density programming report Entered value Printer density Job code A to H from the left * Job codes #71, 72, 76 and 77 are fixed settings, for which you cannot change the settings. Printing density example 6 PLU programming report Domestic currency symbol Training clerk specification Training mode text Language selection Range PLU code PLU text Mode parameter Unit price 4 Auto key programming report Associated dept.
A301_4(En) 03.4.24 7:42 PM Page 58 READING (X) AND RESETTING (Z) OF SALES TOTALS • Use the reading function (X) when you need to take a reading of sales information entered since the last reset. You can take this reading any number of times. It does not affect the register’s memory. • Use the resetting function (Z) when you need to clear the register’s memory.
A301_4(En) 03.4.
A301_4(En) 03.4.24 7:42 PM Page 60 2 Daily Sales Totals Full sales report • Sample report *2 Mode title*1 Reset counter Net grand total (GT2-GT3) Grand total of plus registration Grand total of minus registration Grand total of training mode registration Subtotal and total counter Subtotal percent 1 counter and total Net sales total *3 Dept.
A301_4(En) 03.4.
A301_4(En) 03.4.24 7:42 PM Page 62 Full group total report on department PLU report by associated department • Sample report • Sample report Mode title Report title Associate dept.
A301_4(En) 03.4.24 7:42 PM Page 63 Individual clerk report • Sample report Hourly report • Sample report Mode title Report title Clerk no. /code Clerk name Customer counter Sales total Average Mode title* Report title Customer counter Sales total *: When you take Z1 report, “Z1” is printed. When you take an hourly report by range, a report of the specified range of time (hour) is printed.
A301_4(En) 03.4.24 7:42 PM Page 64 3 Periodic Consolidation Generality The periodic reading or resetting reports are the same in format as those in the X1/Z1 report for daily sales. The mode title will read “X2” or “Z2”.
A301_4(En) 03.4.24 7:42 PM Page 65 CCD -Compulsory Cash/cheque DeclarationYou can make mandatory the declaration of the cash/cheque amount in the drawer before outputting clerk Z report. If your register is programmed for compulsory cash/cheque declaration (CCD), a clerk must first count and declare the cash and cheque amounts (of domestic and foreign currency) in the drawer before the clerk can output a clerk report. The procedure for outputting a CCD report is shown below.
A301_4(En) 03.4.24 7:42 PM Page 66 OVERRIDE ENTRIES Programmed limit for functions (such as for maximum amounts) can be overridden by making an entry in the MGR mode. 1. 2. Turn the mode switch to the MGR position. Make an override entry. OPX/Z REG MGR X1/Z1 X2/Z2 In this example, the register has been programmed not to allow discounts entries over 1.00. Key operation example REG mode entries PGM Print 1500 £ 250 - ...Error l Turn the mode switch to the MGR position.
A301_4(En) 03.4.24 7:42 PM Page 67 EURO MIGRATION FUNCTION • EURO programming described in this section are for users in the countries which will join to the members of the European Currency Union, not for the users in the countries already have joined the Union. Your register can be modified to correspond with each period set for the introduction of EURO, and in your register each currency is treated as shown on the table below depending on which period you are in.
A301_4(En) 03.4.24 7:42 PM Page 68 The details of the register system modification are as shown below: Items A=1 (EURO status 1) A=2 (EURO status 2) A=3 (EURO status 3) General Z1 report General Z2 report GT memories (GT1, GT2, GT3 and Training GT) Conversion of preset prices of Dept.
A301_4(En) 03.4.24 7:42 PM Page 69 Checking the current EURO status You can check the EURO status currently set on the cash register. Set the manager key (MA) to the X2/Z2 position, and perform the following sequence. The current EURO status will be printed on the receipt/journal.
A301_5(En) 03.4.24 7:45 PM Page 70 OPERATOR MAINTENANCE 1 In case of Power Failure When power is lost, the machine retains its memory contents and all information on sales entries. • When power failure is encountered in register idle state or during an entry, the machine returns to normal operation after power recovery. • When power failure is encountered during a printing cycle, the register prints “============” and then carries out the correct printing procedure after power recovery.
A301_5(En) 03.4.24 7:45 PM Page 71 4 Replacing the Paper Roll Be sure to use paper rolls specified by SHARP. The use of any other paper rolls other than those specified could cause paper jamming, resulting in register malfunction. Paper specification Paper width: 44.5 ± 0.5 mm Max. outside diameter: 80 mm Quality: Thermal paper • Be sure to set paper roll(s) prior to using your machine, otherwise it may cause a malfunction. Install the paper roll in the printer.
A301_5(En) 03.4.24 7:45 PM Page 72 8. Remove the outer side of the take-up spool as shown on the left. 9. Remove the printed journal roll from the take-up spool. Installing the paper roll Caution: The paper cutter is mounted on the printer (receipt side). Be careful not to cut yourself. Installing the receipt paper roll: 1. Turn the mode switch to the REG position with the power cord connected. 2. Remove the printer cover. 3. Check that the print head release lever is in the printing position. 4.
A301_5(En) 03.4.24 7:45 PM Page 73 5 Removing a Paper Jam Caution: The paper cutter is mounted on the printer (receipt side). Be careful not to cut yourself. Never touch the print head immediately after printing, because the head may still be hot. 1. Remove the printer cover. 2. Pull the print head release lever all the way forward (after it stops at one position, continue pulling forward until it stops again and cannot be pulled forward any further). 3. Remove the paper jam.
A301_5(En) 03.4.24 7:45 PM Page 74 7 Removing the Till and the Drawer The till in the register is detachable. After closing your business for the day, remove the till from the drawer and keep the drawer open. The 8-denomination coin case is also detachable from the till. To detach the drawer, pull it forward fully with the till removed, and remove it by lifting it up.
A301_5(En) 03.4.24 7:45 PM Page 75 9 Before Calling for Service The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional faults of the machine. It is therefore advisable to refer to “Checking” shown in the right-hand column before calling for service. Fault Checking (1) The display shows symbols that do not make sense.
A301_5(En) 03.4.24 7:45 PM Page 76 SPECIFICATIONS Model: Dimensions: Weight: Power source: Power consumption: XE-A301 421 (W) x 429 (D) x 305 (H) mm 12.7 kg Official (nominal) voltage and frequency Stand-by: 5W (When the official voltage is 220 to 230 V) Stand-by: 6W (When the official voltage is 230 to 240 V) Operating: 43W (When the official voltage is 220 to 230 V) Operating: 45W (When the official voltage is 230 to 240 V) 0 °C to 40 °C LSI (CPU) etc.
A301(Cover2-3) 03.4.24 7:33 PM Page C3 FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
SHARP CORPORATION Printed in China / Gedruckt in China / Imprimé en Chine / Impreso en China / Gedrukt in China KS(TINSM2498RCZZ)➀
