Operation Manual

52
Thermal printer density
* By default, 50 is set. To make the print darker, set a larger number, and to make the print lighter, set a smaller
number.
Language selection
*Language: 0: English 1: German 2: French 3: Spanish
By default, English is set.
When you change the language, the texts such as clerk names, logo messages and function texts
(refer to page 40), which you programmed, will be reset to the default settings. The language
selection must be made therefore before programming clerk names, logo messages and function
texts.
Training clerk specification for training mode
For the details of clerk training, please refer to “TRAINING MODE” on page 57.
s
86
@
4
sA
PrintKey operation example
s86@
Clerk number
(1 to 20)
As
To cancel
s
88
@
1
A
PrintKey operation example
s88@
*Language
(0-3)
A
To set “0”
s
50
@
70
sA
PrintKey operation example
s50@
*Printer density
(00-99)
As
To set “0”
A301_3(En) 03.4.24 7:40 PM Page 52