Important Information OPERATION MANUAL Setup & Connections Operation Useful Features MODEL LCD PROJECTOR Maintenance & Troubleshooting XG-P10XU Appendix
Before using the LCD projector, please read this operation manual carefully. Important Information OPERATION MANUAL ENGLISH IMPORTANT For your assistance in reporting the loss or theft of your Color LCD Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 10. Model No.: XG-P10XU Serial No.
IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Cleaning Unplug this product from the wall outlet before cleaning.
Outstanding Features Important Information 1. ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS Compatible with up to 200 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide variety of high-end PCs and Workstations. (Page 11) X L H 2. FOR USE WITH DTV Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems. (Page 13) 3.
Contents 2 3 4 5 6 6 7 Setup & Connections Supplied Accessories …………………………… 10 Connecting the Projector ……………………… 11 Operation 33 34 35 36 37 37 38 38 39 40 41 41 42 43 44 Maintenance & Troubleshooting 16 18 21 23 25 Appendix Optional Lenses …………………………………… Transporting the Projector ……………………… Connection Pin Assignments …………………… RS-232C Port Specifications …………………… Wired Remote Control Terminal Specifications ………………………………… Computer Compatibility Chart ………………… Specifications ……………………………………… Dimensions ……
Important Information Usage Guidelines CAUTION LASER RADIATIONDO NOT STARE INTO BEAM WAVE LENGTH : 650nm MAX. OUTPUT : 1mW CLASS II LASER PRODUCT "COMPLIES WITH 21 CFR SUBCHAPTER J" SHARP ELECTRONICS CORPORATION SHARP PLAZA, MAHWAH, NEW JERSEY 07430 U.S.A. ONLY TEL : 1-800-BE-SHARP REMOTE CONTROL MODEL NO. : RRMCG1585CESA DC3V (1.5VX2PCS.) MADE IN CHINA FABRIQUÉ AU CHINE AVOID EXPOSURE-LASER RADIATION IS EMITTED FROM THIS APERTURE.
How to Access the PDF Operation Manuals (for Windows and Macintosh) Important Information PDF operation manuals in several languages are included in the CD-ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it from the Internet (http://www.adobe.com) or install it from the CD-ROM.
Part Names Important Information Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Part Names Front View MUTE button Important Information Remote Control Top View Remote control signal transmitter 17 VOLUME buttons ( / ) POWER buttons 17 (ON/OFF) 17 LENS/BLACK 20 SCREEN button 37 22 LASER POINTER/ 23 MENU button 5 Laser pointer window Rear View 22 MOUSE/ ADJUSTMENT 23 buttons (∂/ƒ/ß/©) RIGHT-CLICK/ 22 ENTER button 23 INPUT button 17 20 UNDO button 32 AUTO SYNC button FREEZE button 33 ENLARGE button 34 LEFT-CLICK 22 button 36 RESIZE button TOOLS button 43 35 GAMMA but
Setup & Connections Setup & Connections E-9
Supplied Accessories Remote control RRMCG1585CESA Two AA size batteries Power cord QACCU5013CEZZ Setup & Connections Computer RGB cable QCNW-5304CEZZ Computer audio cable QCNW-4870CEZZ Remote mouse receiver RUNTK0673CEZZ PS/2 mouse control cable QCNW-5113CEZZ Extra air filter PFILD0088CEZZ Three BNC-RCA adaptors QPLGJ0107GEZZ DIN-D-sub RS-232C cable QCNW-5288CEZZ USB mouse control cable QCNW-5680CEZZ Lens cap PCAPH1056CESA CD-ROM UDSKA0022CEN1 LCD projector quick reference TINS-7053CEZZ LCD pr
Connecting the Projector Connecting the Power Cord Plug the supplied power cord into the AC socket on the back of the projector. Setup & Connections Power cord QACCU5013CEZZ Connecting the Projector to a Computer You can connect your projector to a computer for projection of full color computer images.
Connecting the Projector • This projector uses a 5 BNC computer input to prevent deterioration of image quality. • Connect the R (PR), G/G sync (Y), B (PB), HD/C sync and VD cables to the correct input terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5 BNC cable (sold separately) directly from the input terminals on the projector to the computer.
Connecting the Projector Connecting the Projector to Video Equipment You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual equipment. CAUTION • Always turn off the projector while connecting to video equipment, in order to protect both the projector and the equipment being connected.
Connecting the Projector Connecting an amplifier and other audio components CAUTION • Always turn off the projector while connecting to audio components, in order to protect both the projector and the components being connected. 1 Setup & Connections • By using external audio components, the volume can be amplified for better sound. • The AUDIO OUTPUT terminal allows you to output audio to audio components from the selected AUDIO INPUT 1, 2 or 3 terminals connected to audiovisual equipment.
Connecting the Projector Connecting the Remote Mouse Receiver You can use the remote control as a remote mouse. Setup & Connections Connecting to the USB port on a PC or Macintosh 1 Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer. 2 Connect the other end to the USB port on the remote mouse receiver.
Operation Operation Basic Operations 1 Make the necessary connections before proceeding. Connect the power cord to a wall outlet. The POWER indicator lights up red and the projector enters standby mode. • If the bottom filter cover is not securely installed, the POWER indicator flashes.
Basic Operations 4 2 Press Power ON. • The flashing green LAMP REPLACEMENT 5 indicator shows that the lamp is warming up. 2, 6 Wait until the indicator stops flashing before operating the projector. • If the power is turned off and then immediately turned on again, it may take a short while before 3 the lamp turns on. • If the keylock level is set to “Level A” or “Level B”, Power ON and Power OFF can only be used on the remote control. (See page 41.
Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted. • The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult. • Position the screen so that it is not in direct sunlight or room light.
Setting up the Screen Using the Adjustment Feet 1 Press foot releases. 2 3 Adjust height of projector and remove hands from foot releases. Rotate feet to make minor changes. • The projector is adjustable up to approximately 5° from the standard position. • When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen.
Setting up the Screen Projector Remote control Digital Image Adjustments Lens Adjustment 3 This function can be used to adjust the focus, zoom and keystone settings. (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) 2 1 Press LENS to select mode. Each time LENS is pressed, the screen changes as shown on the left. 2 Press ENTER to display test pattern. 3 Press ∂/ƒ/ß/© to make adjustments. 4 a. Press LENS until normal screen appears. b.
Operating the Wireless Mouse from the Remote Control Using the Remote Control as a Wireless Mouse Operation The remote control has the following three functions: • Projector control • Wireless mouse • Laser pointer MOUSE/ADJUSTMENT switch (Remote control) MOUSE ADJ. MOUSE Wireless mouse Laser pointer ADJ. Projector control Remote Control/Mouse Receiver Positioning • The remote control can be used to control the projector within the ranges shown below.
Operating the Wireless Mouse from the Remote Control Use as a Wireless Mouse Be sure the supplied remote mouse receiver is connected to your computer. MOUSE Slide the MOUSE/ADJUSTMENT switch to MOUSE. ADJ. Effective buttons in MOUSE mode LASER POINTER BLACK SCREEN LEFT-CLICK MOUSE RIGHT-CLICK • The wireless mouse may not operate correctly if your computer serial port is not correctly set up. Refer to the computer’s operation manual for details of setting up/installing the mouse driver.
Using the GUI (Graphical User Interface) Menu Screens Projector Remote control This projector has two sets of menu screens (INPUT 1 or 2 and INPUT 3) that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector or the remote control with the following buttons.
Using the GUI (Graphical User Interface) Menu Screens Items on the INPUT 1 or INPUT 2 Mode Menu Bar Main menu Picture Items on the INPUT 3 (VIDEO) Mode Menu Bar Main menu Contrast 30 30 30 Bright 30 30 30 Color 30 30 30 30 Tint 30 30 Sharp 30 30 Sharp 30 30 Red 30 30 Red 30 30 Blue 30 30 Blue 30 30 Contrast 30 30 Bright 30 Color 30 Tint 3 CLR Temp 3 Picture Computer/RGB Component 3 CLR Temp Reset Interlaced Reset Signal Type
Selecting the On-screen Display Language Projector Remote control English is the preset language for the On-screen Display. The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. 1, 5 (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) 2, 3 1 Press MENU. MOUSE ADJ. 2 Press ß/© to select “Language”. 4 3 Press ∂/ƒ to select the desired language .
Picture Adjustments Projector Remote control Adjusting the Picture You can adjust the projector’s picture to your preferences with the following picture settings.
Picture Adjustments Projector Remote control Adjusting the Color Temperature This function can be used to adjust the color temperature to suit the type of image input to the projector (video, computer image, TV broadcast, etc.). Decrease the color temperature to create warmer, reddish images for natural flesh tones. Increase the color temperature to create cooler, bluish images for a brighter picture.
Picture Adjustments Projector Remote control I/P Conversion This function allows you to select either an interlaced display or a progressive display of a video signal. The progressive display projects a smoother video image. (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) 1, 6 2, 3, 4 5 (GUI) On-screen Display MOUSE ADJ. 1 Press MENU. 2 Press ß/© to select “Picture”. 3 Press ∂/ƒ to select “I/P Conversion”, and then press ©.
Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control 1, 5 2, 3, 4 Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the optimum computer image.
Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Saving and Selecting Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are stored, they can be easily selected each time you connect a computer to the projector. 1, 6 2, 3, 4 5 Saving the adjustment setting (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) MOUSE ADJ. 1 Press MENU.
Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Special Mode Adjustment Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match the computer display mode. 1, 6 2, 3, 4 5 (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) MOUSE ADJ. 1 Press MENU.
Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing AUTO SYNC, or automatically by setting “Auto Sync” to “ON” in the projector’s GUI menu. 1, 5 When “Auto Sync” is set to “ON”: • The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed.
Useful Features Freeze Function Remote control Useful Features Projector 1, 2 This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. You can also use this function to display a still image from a computer while you make preparations for the next computer images to be presented. 1 Press FREEZE to freeze the image.
Digital Image Magnification Remote control Projector This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ.) MOUSE ADJ. 2 1 Press ENLARGE. Each time ENLARGE is pressed, the image will be magnified. 1 3 On-screen Display 2 When the image is magnified, you can pan and scan around the image by using ∂/ƒ/ß/©.
Gamma Correction Projector Remote control 1 2 • Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. • Four gamma settings are available to allow for differences in the images displayed and in the brightness of the room.
Selecting the Picture Display Mode Projector Remote control This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose NORMAL, FIT TO SCREEN, DOT BY DOT, WIDE or NORMAL (WIDE) image. 1 Press RESIZE. Each time RESIZE is pressed, the picture mode changes as shown below. 1 2 To return to the standard image, press UNDO while “RESIZE” is displayed on the screen.
Black Screen Function Projector Remote control This function can be used to superimpose a black screen over the projected image. Blacking out the Projected Image BLACK SCREEN Press BLACK SCREEN. The screen turns black and “BLACK SCREEN” is displayed on the screen. To return to the original projected image, press BLACK SCREEN again. button 1, 5 2, 3, 4 MOUSE ADJ.
Selecting a Background Image Projector Remote control This function allows you to select the image displayed when no signal is being sent to the projector. Description of Background Images 1, 6 2, 3, 4 5 Selected item Background image Sharp SHARP default image Custom User customized image (i.e. company logo) Blue Blue screen None Black screen (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) (GUI) On-screen Display MOUSE ADJ. 1 Press MENU.
Economy Mode Projector Remote control These functions allow you to reduce the power consumption when the projector is in standby mode. Monitor Out/RS-232C Off Function 1, 5 2, 3, 4 This projector consumes power when using a monitor connected to the OUTPUT port for INPUT 1, 2 and a computer connected to the RS-232C port. When not using these ports, “MNTR Out/RS232C” can be set to “ ” to reduce standby power consumption.
Password Projector Remote control A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI. Setting the Password 1, 6 2, 3, 4, 5 (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) MOUSE ADJ. 1 Press MENU. 2 Press ß/© to select “Options”. (GUI) On-screen Display 3 Press ∂/ƒ to select “Password”, and then press ©.
Selecting the Keylock Level Projector Remote control This function can be used to lock the use of certain operation buttons on the projector. The user can still operate the projector fully with the remote control. Description of Keylock Levels 1, 5 2, 3, 4 Selected item Normal Level A Level B (GUI) On-screen Display Description All operation buttons are functional. Only INPUT, VOLUME, MUTE, BLACK SCREEN on the projector are available. All operation buttons on the projector are unavailable.
Reverse/Invert Image Function Projector Remote control This projector is equipped with a reverse/invert image function which allows you to reverse or invert the projected image for various applications. Description of Projected Images 1, 5 2, 3 4 (GUI) On-screen Display When “Front” is selected.
Using the Presentation Tools Projector Remote control 2, 4 This projector is equipped with presentation tools that can be used to emphasize keypoints within your presentation. (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) 3, 5 MOUSE ADJ. 1 Press TOOLS to display the presentation tools menu window on the screen. 2 Press ∂/ƒ/ß/© to select the desired tool and color. 1 6 3 Press ENTER to select it.
Status Function Remote control Projector This function can be used to display all the adjusted settings on the screen simultaneously. (Slide the MOUSE/ADJUSTMENT switch on the remote control to the ADJ. position.) 1, 4 MOUSE ADJ. 1 Press MENU. 2 2 Press ß/© to select “Status”. 3 3 Press ENTER to display all the adjustment settings. 4 To exit from the GUI, press MENU.
Maintenance & Troubleshooting Maintenance & Troubleshooting E-45
Air Filter Maintenance • This projector is equipped with two air filters to ensure the optimal operating condition of the projector. • The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter (PFILD0088CEZZ) when it is no longer possible to clean it.
Lamp/Maintenance Indicators Maintenance Indicators POWER indicator LAMP REPLACEMENT indicator Maintenance Indicator TEMPERATURE WARNING indicator LAMP REPLACEMENT indicator POWER indicator TEMPERATURE WARNING indicator • The warning lights on the projector indicate problems inside the projector. • There are two warning lights: a TEMPERATURE WARNING indicator which warns that the projector is too hot, and a LAMP REPLACEMENT indicator which lets you know when to change the lamp.
Replacing the Projection Lamp It is recommended that the lamp be replaced after approximately 900 cumulative hours of use or when you notice a significant deterioration of the picture and color quality. Carefully change the lamp by following the steps below. If the new lamp does not light after replacement, take your projector to the nearest Authorized Sharp Industrial LCD Products Dealer or Service Center for repair.
Replacing the Projection Lamp Resetting the lamp timer 1 Connect the power cord. 2 Plug the power cord into the AC socket of the projector. Reset the lamp timer. While pressing ƒ, © and ENTER on the projector, press POWER ON on the projector. “LAMP 0000H” is displayed, indicating that the lamp timer is reset. 佡 • Reset the lamp timer only after replacing the lamp.
Appendix Optional Lenses Optional wide and telephoto lenses from Sharp are also available for specialized application. Please see your local Sharp Industrial LCD Products Dealer for details on the AN-W6EZ and AN-T6EZ. (Refer to the lens operation manual when attaching the lens.) Wide-zoom lens AN-W6EZ Tele-zoom lens AN-T6EZ 100 Screen Project Distance 8 6 –11 2 (2.6–3.4 m) 12 –15 11 (3.65–4.86 m) AN-W6EZ 16 5 –21 6 (5–6.
Connection Pin Assignments Analog Computer 1 and 2 Signal Input Ports: 15-pin mini D-sub female connector 1 6 11 5 10 15 Computer Input Analog 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Reserve input 1 5. Composite sync 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) 9. 10. 11. 12. 13. 14. 15.
RS-232C Port Specifications PC control A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type, sold separately) to the projector. (See page 14 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.
RS-232C Port Specifications COMMAND PARAMETER C1 C2 C3 C4 P1 P2 P3 P4 CONTROL ITEM INPUT2 SIGNAL TYPE SELECTION INPUT2 I/P CONVERSION INPUT 2 IMAGE ADJUSTMENT CONTROL CONTENTS I B S I _ _ _ 1 RGB I B S I _ _ _ 2 COMPONENT R B I P _ _ _ 0 INTERLACED R B I P _ _ _ 1 R B C T _ _ * R B P I _ * R B B R _ R B R D R B B R B R COMMAND PARAMETER C1 C2 C3 C4 P1 P2 P3 P4 CONTROL ITEM CONTROL CONTENTS M E S Y _ _ _ 1 AUTO M E S Y
Wired Remote Control Terminal Specifications Specifications of wired remote control input • ø3.5 mm minijack • External: 5 V (1 A) • Internal: GND Function and transmission codes No. Control Item System Code (Function) Data Code C1 C2 C3 C4 C5 C6 C7 C8 No.
Computer Compatibility Chart Horizontal Frequency: 15–126kHz Vertical Frequency: 43–200 Hz Pixel Clock: 12–230 MHz* Compatible with sync on green and composite sync signals UXGA (1,600 1,200) compatible in advanced intelligent compression AICS (Advanced Intelligent Compression and Expansion System) resizing technology PC/ MAC/ WS Resolution 640 350 720 350 640 400 720 400 VGA 640 480 PC SVGA XGA 800 600 1,024 768 Horizontal Frequency (kHz) Vertical Frequency (Hz) VESA Standard
Specifications Product type Model Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input signal Component input signal Horizontal resolution Audio output Computer RGB input signal Pixel clock Vertical frequency Horizontal frequency Computer control signal Speaker system Rated voltage Input current Rated frequency Power consumption Operating temperature Storage temperature Cabinet I/R carrier frequency Laser pointer of remote control Dimensions (approx.
Dimensions Rear View 2 3/8 (60.5) 2 3/16 (55.
Guide to Effective Presentations Electronic presentations are one of the most effective tools presenters can use to persuade an audience. There are several ways to enhance your presentation and maximize your effectiveness. The following are guidelines to help you create and deliver a dynamic presentation. a. Types of Presentations Computer Presentations • To present basic information such as graphs, spreadsheets, documents and images, use word processing and spreadsheet applications.
Guide to Effective Presentations • Background colors can subconsciously affect the audience: Red Blue Red—increases viewers’ pulse and breathing and encourages risk taking but can also be associated with financial loss. Blue—has a calming and conservative affect on the audience but can also create boredom among corporate audiences that are often inundated with this background color. Green—stimulates interaction. Green Black Black—conveys finality and certainty.
Guide to Effective Presentations Good Bad Good c. Set-Up When giving a presentation, you need to set the stage both figuratively and literally for success. The way you set up a presentation room will have a great impact on the audience’s perception of you and your message. By manipulating the placement and use of the following tools, you will improve the impact of your presentation.
Guide to Effective Presentations d. Rehearsing & Delivery • The best time to rehearse is the day or evening before, not a couple of hours before, and the best place to rehearse is in the actual room. Rehearsing a speech in a small office is not the same as standing up in front of 100 people in a hotel ballroom or classroom. • Due to varying processor speeds of computers, practice your slide transitions for proper timing.
Glossary Anti-aliasing digital keystone correction Function to digitally correct a distorted image when the projector is set up at an angle. Aspect ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide images with an aspect ratio of 16 : 9 and 21 : 9. Auto sync Optimizes projected computer images by automatically adjusting certain characteristics. Background Initial setting image projected when no signal is being input.
Index A AC socket ......................................................................... ADJUSTMENT buttons ..................................................... Air filter ............................................................................. Anti-aliasing digital keystone correction .......................... Aspect ratio ...................................................................... Audio adjustments ........................................................... AUDIO INPUT 1 terminal ....
SHARP CORPORATION