- SHARP LCD PROJECTOR OPERATION MANUAL MODEL XG - P10XU

E-36
Useful Features
1
2
Selecting the Picture Display Mode
Projector Remote control This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, FIT TO SCREEN, DOT BY DOT, WIDE or
NORMAL (WIDE) image.
1 Press RESIZE. Each time RESIZE is pressed, the
picture mode changes as shown below.
2 To return to the standard image, press UNDO
while “RESIZE” is displayed on the screen.
COMPUTER
EXAMPLE
SVGA (800  600)
XGA (1024  768)
UXGA (1600  1200)
SXGA (1280  1024)
1024  768
1024  768
1024  768
960  768
800  600
1024  768
1600  1200
1280  1024
–
–
–
1024  768
480I/P,
NTSC,
PAL,
SECAM
720P,
1080i
4:3
480I/P, 720P, 1080i
1024  768
1024  768
–
–
768  576*
768  576*
768  576*
–
1024  576*
1024  576*
1024  576*
1024  576*
*The digital image shift function can be used with these picture display modes.
VIDEO/DTV
EXAMPLE
4:3 aspect ratio
Other aspect ratios
NORMAL FIT TO SCREEN DOT BY DOT
NORMAL FIT TO SCREEN DOT BY DOT
4:3 aspect ratio
Other aspect ratios
4:3 aspect ratio
480I/P, NTSC, PAL, SECAM
16:9 aspect ratio, 720P, 1080i
Letterbox
Squeeze
NORMAL WIDE NORMAL (WIDE)
Letterbox
Squeeze
4:3 aspect ratio
16:9 aspect ratio
Output screen image
Output screen image
NORMAL WIDE NORMAL (WIDE)
Input Signal
Input Signal