Installation Instructions

Wireless Charger

Model:56021-01

Non-slip silicone

Cable

Upper shell

Bottom shell

Watch wireless coil

Connector PCBA

.Input:5V/ 1.5A

.Output:5V/0.5A

.Working Power:2.5W

.Working Distance:3mm

.Charigng Efficiency:70%

.Standard:QI

.Quality:Quality and meet CE/FCC/ROHS

.Oparation frequency:124.38kHz-206.46kHz

.H-field:21.27dBμA/m at 3m

.Hardware:56021-01-RevA

.Software:56021-01-RevA

Application Devices

Compatible with Peregrine

FCC ID:2AO24-56021-01

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator and your body. This transmitter must

not be co-located or operating in conjunction with any other antenna or transmitter.

PAGE 1
Wireless Charger Model:56021-01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Watch wireless coil .Input:5V/ 1.5A .Output:5V/0.5A .Working Power:2.5W .Working Distance:3mm .Charigng Efficiency:70% .Standard:QI .Quality:Quality and meet CE/FCC/ROHS .Oparation frequency:124.