User Manual

MAINTENANCE

NOTE: Disconnect the power cord from the power source before performing any

service or maintenance on this unit.

7.1 Cleaning: Clean the incubator interior and remove and clean shelves on a

regular basis. Use a disinfectant that is suitable for your application. A thorough

periodic cleaning is strongly recommended. Use care when cleaning the door

gasket to prevent damage which could impair the positive door seal.

WARNING: Never clean the unit with alcohol or flammable cleaners with the unit

connected to the electrical supply. Always disconnect the unit from the electrical

service when cleaning and assure all volatile or flammable cleaners are

evaporated and dry before reattaching the unit to the power supply.

7.2 Storage: To prepare the unit for storage, remove all shelves and shelf clips and

disconnect the power supply. Be certain that the chamber is clean and dry and

the door is positively locked in the closed position. See Section 2.3,

Lifting/Handling, for proper transport procedures.

7.3 No maintenance is required on the electrical components. If electrical or

temperature problems occur, please see the Troubleshooting guide, Section 8.0,

before calling for service.

Section