4 Circuit WiFi Relay Switch USER GUIDE WARRANTY & WARRANTY TERMS Allterco Robotics EOOD Sofia, Bulgaria © January, 2019
USER GUIDE WiFi Quad Relay Switch Shelly® Fuse N L N O4 L4 O3 L3 O2 L2 O1 L1 LEGEND: N - Neutral input (Zero); L - Line input (110-230V); L1, 2, 3, 4* - Input of O1, 2, 3, 4; O1, 2, 3, 4 - Output 1, 2, 3, 4; S - Switch (input) for control; S1, 2, 3, 4 - Switch (input) controlling O1, 2, 3, 4 *The cables connected to L1, L2, L3 and L4 must be with the same lenght! 14.16 W 15.27 W 13.88 W 14.
Display Home Screen – Shows the status of the circuit (on/off) and current power consumption. Status bar – It is available on all screens, positioned at the top of the display. You can see icons showing: Mode, Time Synchronization and connection to the Cloud service. fig. 2 WiFi settings Status Bar Legend: Mode: AP Status: got ip Ssid: shelly4pro-11C3F0 Ip: 192.168.33.
Technical Information range of the Device. Shelly® Devices can communicate directly with other WiFi Devices through HTTP protocol. • Control through WiFi from a mobile phone, PC, automation system or any other Device supporting HTTP and/or UDP protocol. • Microprocessor management. • Controlled elements: 4 electrical circuits/ appliances. • Controlling elements: 4 relays. • Shelly may be controlled by an external button/switch. An API can be provided by the Manufacturer.
CAUTION! Before beginning the installation please read the accompanying documentation carefully and completely. Failure to follow recommended procedures could lead to malfunction, danger to your life or violation of the law. Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or operation of this Device. Control your home with your voice All Shelly devices are compatible with Amazon Echo and Google Home. Please see our step-by-step guide on: https://shelly.
MOBILE APPLICATION FOR SHELLY® Allterco Robotics EOOD Sofia, Bulgaria © March, 2017 6
The Shelly Cloud Mobile Application Shelly Cloud gives you opportunity to control and adjust all Shelly® Devices from anywhere in the world. fig. 5 You only need an Internet connection and our mobile application, installed on your smartphone or tablet. To install the application please visit Google Play (Android - fig.4) or App Store (iOS fig.5) and install the Shelly Cloud app. Registration fig.
automatic turning on or off of the Devices at predefined hours or based on other parameters like temperature, humidity, light etc. Step 2 Choose “Add Device”. In order to add more Devices later, use the app Menu at the top right corner of the main screen and click “Add Device”. Type the name (SSID) and password for the WiFi network, to which you want to add the Device. Shelly Cloud allows easy control and monitoring by using a mobile phone, tablet or PC.
Press the Home button of your iPhone/iPad/ iPod. Open Settings > WiFi and connect to the WiFi network created by Shelly, e.g. shellys4pro-35FA58. Step 4: Approximately 30 seconds after discovery of any new Devices оn the local WiFi network, а list will be displayed by default in the “Discovered Devices” room. If using Android: your phone/tablet will automatically scan and include all new Shelly Devices found in the WiFi network that you are connected to.
Step 6: Enter a name for the Device (in the Device name field). Choose a Room, in which the Device has to be positioned. You can choose an icon or add a picture to make it easier to recognize. Press “Save Device”. Step 7: To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press “YES” on the following pop-up.
Shelly Devices Settings Auto ON/OFF After your Shelly Device is included in the app, you can control it, change its settings and automate the way it works. Тo manage the power supply automatically, you may use: When ON – Auto OFF after: After turning on, the power supply will automatically shutdown after a predefined time (in seconds). A value of 0 will cancel the automatic shutdown. To switch the Device on and off, use the respective ON/OFF button.
Max Power Per Channel: You can limit the maximum power the relay will supply on each channel. If the pre-set current draw is exceeded, Shelly will turn the power off. Allowable power can be set up to 2300W. Button Type: • Momentary - Set Shelly input to be buttons. Push for ON, push again for OFF. • Toggle Switch - Set Shelly input to be flip switches, with one state for ON and another state for OFF. Schedule Settings This function requires an Internet connection.
The Embedded Web Interface Step 2 When Shelly has created an own WiFi network (own AP), with name (SSID) such as: shellys4pro-35FA58. Еven without the mobile app the Shelly Device can be set and controlled through a browser and WiFi connection of a mobile phone, tablet or PC. Connect to it with your phone, tablet or PC. Step 3 Type 192.168.33.1 into the address field of your browser to load the web interface of the Shelly Device. ABBREVIATIONS USED: Shelly-ID – the unique name of the Device.
Settings – General Settings In this menu, you can configure the Shelly Device’s work and connection modes. Login: Access to the Device Leave Unprotected removing the notification for disabled authorization. WiFi Settings – the WiFi connection settings. Set Login – you can turn authentication on or off Access Point (AP) Mode: allows the Device to operate as a WiFi access point. the User can change the name (SSID) and the password to access the WiFi.
Relay 1/Relay 2/Relay 3/ Relay 4 Screen Power On Default Mode This sets the relays’ default state when powered from the power grid. ON: By default when the socket is powered and the connected circuit/appliance to it will be powered as well. OFF: By default the socket and any connected circuit/appliance will not be powered, even when it is connected to the grid.
Sunrise/Sunset hours This function requires an Internet connection. To use Internet, a Shelly Device has to be connected to a local WiFi network with а working Internet connection. Shelly receives actual information through the Internet about the time of sunrise and sunset in your area. Shelly may turn on or off automatically at sunrise/sunset, or at a specified time before or after sunrise/ sunset. On/Off hours This function requires an Internet connection.
Warranty Terms 1. The Device’s warranty term is 24 (twenty four) months, beginning with the date of purchase by the End User. The Manufacturer is not responsible for extra warranty terms by any other than the Manufacturer. 2. The Warranty is valid for the territory of EU. The warranty is applicable in compliance with all relevant laws and users’ rights protections. The purchaser of the Device is entitled to exercise his/her rights in accordance with all applicable laws and regulations. 3.
When the Device has been used or wired inappropriately, including inappropriate fuses, overpassing maximal values of load and current, electric shock, short circuit or other problems in the power supply, the power grid or the radio network. When there is a non-compliance between warranty card and/or without a purchase receipt, or attempted forgery of these documents, including (but not limited to) the warranty card or the documents proving the purchase.
When damage has been caused by the use of faulty Devices and/or accessories. When damage has been caused by faulty software, a computer virus or other harmful behaviour on the Internet, or by lack of software updates or incorrect updates by a method not provided by either the Manufacturer or by the Manufacturer’s software. 11.
Warranty Card Shelly® Quad Relay Switch (model S4Pro-1.0) ........................................................... ........................................................... Serial number: ........................................................... ........................................................... Date of purchase: ........................................................... ...........................................................