Instructions

USER GUIDE
WARRANTY & WARRANTY TERMS
2 Circuit WiFi Relay Switch
fig. 1
fig. 2
LEGEND:
N - Neutral input (110-230V AC); + Positive input (24-60V DC)
L - Line input (110-230V AC); - Negative input (24-60V DC)
O1 - Output 1;
O2 - Output 2;
SW1 - Switch 1 (input controlling O1);
SW2 - Switch 2 (input controlling O2).
Power supply:
110-230V ±10% 50/60Hz AC
24-60V DC
Max load per channel:
10A/230V, 50/60Hz
Complies with EU standards:
• RE Directive 2014/53/EU
• LVD 2014/35/EU
• EMC 2004/108/WE
• RoHS2 2011/65/UE
Working temperature:
– 40°C up to 40°C
Radio signal power:
1mW
Radio protocol:
WiFi 802.11 b/g/n
Frequency:
2400 – 2500 MHz;
Operational range (depending on local construction):
• up to 50 m outdoors
• up to 30 m indoors
Dimensions (HxWxL):
39 x 36 x 17 mm
Electrical consumption:
< 1 W
The Shelly
®
Dual WiFi Relay Switch by Allterco Robotics is
intended to be mounted into a standard in-wall console, be-
hind power sockets and light switches in order to control and
monitor the electric power through it, independent for each
channel. Shelly may work as a standalone Device or as an
accessory to a home automation controller.
• Purpose of control: Operating
• Construction of control: Independently mounted
• Type 1.B Action
• Pollution Degree 2
• Impulse Voltage: 4000 V
Technical Information
• Control through WiFi from a mobile phone, PC, automation
system or any other Device supporting HTTP and/or UDP
protocol.
• Microprocessor management.
• Controlled elements: 2 electrical circuits/appliances.
• Controlling elements: 2 relays.
• Shelly may be controlled by an external button/switch.
CAUTION! Danger of electrocution. Mounting the
Device to the power grid has to be performed with
caution.
CAUTION! Do not allow children to play with the
button/switch connected the Device. Keep the De-
vices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly
®
Shelly
®
is a family of innovative Devices, which allow remote
control of electric appli-ances through mobile phone, PC or
home automation system. Shelly
®
uses WiFi to connect to
the devices controlling it. They can be in the same WiFi net-
work or they can use remote access (through the Internet).
Shelly
®
may work standalone, without being managed by a
home automation controller, in the local WiFi network, as well
as through a cloud service, from everywhere the User has
Internet access.
Shelly
®
has an integrated web server, through which the User
may adjust, control and monitor the Device. Shelly
®
has two
WiFi modes - access Point (AP) and Client mode (CM). To
operate in Client Mode, a WiFi router must be located within
the range of the Device. Shelly
®
devices can communicate
directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly
®
devices
may be available for monitor and control even if the User is
outside the range of the local WiFi network, as long as the
WiFi router is connected to the Internet. The cloud function
could be used, which is activated through the web server of
the Device or through the settings in the Shelly Cloud mobile
application.
The User can register and access Shelly Cloud, using either
Android or iOS mobile applications, or any internet browser
and the web site: https://my.Shelly.cloud/.
Installation Instructions
CAUTION! Danger of electrocution. The mounting/
installation of the Device should be done by a qual-
ied person (electrician).
CAUTION! Danger of electrocution. Even when the
Device is turned off, it is possible to have voltage
across its clamps. Every change in the connection
of the clamps has to be done after ensuring all local power
is powered off/disconnected.
CAUTION! Do not connect the Device to appliances
exceeding the given max load!
CAUTION! Connect the Device only in the way
shown in these instructions. Any other method
could cause damage and/or injury.
CAUTION! Before beginning the installation please
read the accompanying documentation carefully
and completely. Failure to follow recommended
procedures could lead to malfunction, danger to your life or
violation of the law. Allterco Robotics is not responsible for
any loss or damage in case of incorrect installation or oper-
ation of this Device.
CAUTION! Use the Device only with power grid and
appliances which comply with all applicable regu-
lations. short circuit in the power grid or any appli-
ance connected to the Device may damage the Device.
RECOMMENDATION: Тhe Device may be connect-
ed to and may control electric circuits and appli-
ances only if they comply with the respective
standards and safety norms.
RECOMMENDATION: The Device may be connected
with solid single-core cables with increased heat re-
sistance to insulation not less than PVC T105°C.
Initial Inclusion
Before installing/mounting the Device ensure that the grid is
powered off (turned down breakers).
Connect the Relay to the power grid and install it in the con-
sole behind the switch/power socket following the scheme
that suites the desired purpose.
1. 1. Connecting to the power grid and to 2 separately con-
trolled devices (circuits) – g. 1
2. 2. Connecting to the power grid and to motor with 2 rotating
directions and 1 button for controlling the directions of rotation
( for electrical curtains, rollers, garage doors etc.) – g. 2.
CAUTION! The controlled bidirectional electric mo-
tor must have built-in or additionally tted restric-
tors (protectors), to turn the power off upon reaching the
end point or protection against gripping. The anti-grip func-
tion helps in case the garage door encounters an obstacle,
its’ movement stops and the reverse motion is triggered to
release the obstacle.
You may choose if you want to use Shelly with the Shelly
Cloud mobile application and Shelly Cloud service. You can
also familiarize yourself with the instructions for Manage-
ment and Control through the embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and
Google Home.
Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR
MANAGMENT OF SHELLY
®
Shelly Cloud gives you opportunity to control and adjust all
Shelly
®
Devices from anywhere in the world.
You only need an internet connection and our mobile applica-
tion, installed on your smartphone or tablet.
To install the application please visit Google Play (Android - g.
3) or App Store (iOS - g. 4) and install the Shelly Cloud app.
fig. 3
fig. 4
Registration
The rst time you load the Shelly Cloud mobile app, you have to
create an account which can manage all your Shelly
®
devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail
address you have used in your registration. You will then re-
ceive instructions to change your password.
WARNING! Be careful when you type your e-mail
address during the registration, as it will be used in
case you forget your password.
After registering, create your rst room (or rooms), where you
are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for auto-
matic turning on or off of the Devices at predened hours or
based on other parameters like temperature, humidity, light
etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mo-
bile phone, tablet or PC.
Device Inclusion
To add a new Shelly device, install it to the power grid fol-
lowing the Installation Instructions included with the Device.
Step 1
After the installation of Shelly in the console behind the pow-
er socket/light switch and the power is turned on Shelly will
create its own WiFi Access Point (AP).
WARNING: In case the Device has not created its
own WiFi network with SSID like shelly-
switch25-35FA58 check if you have connected Shelly correct-
ly by the schemes described above. If you do not see an ac-
tive WiFi network with SSID like shellyswitch25-35FA58,
reset the Device. If the Device has been powered on, you have
to restart by powering it off and on again. After turning the
power on, you have one minute to press 5 consecutive times
the button/switch connected to either input (SW1/SW2). You
have to hear the Relay trigger itself. After the trigger sound,
Shelly should return to AP Mode. If you have physicall access
to the device, you can press and hold the Reset button for 10
second, which is placed on the back of the device. Shelly
should return to AP Mode. If not, please repeat or contact our
customer support at: [e-mail]
Step 2
Choose “Add Device”.
In order to add more Devices later, use the app menu at the
top right corner of the main screen and click “Add Device”.
Type the name (SSID) and password for the WiFi network, to
which you want to add the Device.
Step 3
If using iOS: you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open
Settings > WiFi and connect to the WiFi network created by
Shelly, e.g. shellyswitch25-35FA58.
If using Android: your phone/tablet will automatically scan
and include all new Shelly Devices in the WiFi network that
you are connected to.
Upon successful Device Inclusion to the WiFi network you
will see the following pop-up:
Step 4:
Approximately 30 seconds after discovery of any new Devic-
es оn the local WiFi network, а list will be displayed by default
in the “Discovered Devices” room.
Step 5:
Enter Discovered Devices and choose the Device you want to
include in your account.
Step 6:
Enter a name for the Device (in the Device Name eld). Choose a
Room, in which the Device has to be positioned. You can choose
an icon or add a picture to make it easier to recognize. Press
“Save Device”.
Specification
N
L
110V-240V
NSW1O1LL02SW2
110-240V AC
NSW1O1LL02SW2
M
N
L
+
-
24-60V DC
NSW1O1LL02SW2
2.5