Wireless Charger user manual Wireless Charger Model：WC15BK
Contents 1.What is in the box 2.Product Introduction 3.Specification 4.How to use 5.Important Notification 6.FCC Statement & Warning 7.Trademark Acknowledgments Thanks for purchasing this fantastic Qi Wireless charger. Please read the manual in detail for proper operation before you get to start to use. What is in the box 1) Qi Wireless Charger x1pc 2) Micro USB cable x1pc 3) Quick User Manual x1pc Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD.
Product Introduction Micro USB B Charging Port LED indicator Antiskid strip
Specification Features: Main functions: single coil wireless charger transmitter; Products applicable: all wireless charging equipment accorded with Qi standard; Charging type: one-on-one charge corresponding area; Fast charging model only work with QC quick charger. Specification: Main functions: single coil wireless charger transmitter; Standard version: WPC - 1.2.
Dimension:170*170*25mm3; How to USE 1, Plug Your Qi Wireless Charger to the Power Source Plug the small end (micro USB B port) of the USB cord into the side of the Qi charger.
3, Charging Status Indicator 1) The indicator green light is on for 4s , then enters the standby status, the green light goes out. 2) Please lay the device directly on wireless charger for charging, the green light always stays on when the charger is in charging status 3) When the device is full of power, the green light goes out. 4) The transmitter has the function of detecting foreign objects(FOD). If there is a foreign object on the transmitter, the green light will flash.
install your heart-birth-maker, the electromagnetic wave have influence on heart-birth-maker’s work. B .
11 Do not make any breakage on the AC adapter,please make sure you connect the AC adapter fully and take the AC adapter off the plug when it’s not used ; 12 Do not use travel converter; 13 Please teach your children to use This equipment has been tested and found to comply with the limits for a WPC device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
