Installation Instructions

Buttons:
Power: Press to turn on/offdevice.
DIM: Press to adjust the brightness of the LED display.
F/C: Press to switch the temperature unit between Fahrenheit and Celsius.
RESET: Press and hold for 5 seconds to enter EZ or AP pairing modes.
Followthe simple steps below to set up your smart
Alexa-EnabledThermometer/Hygrometer.
You need to install and setup both the Thermo Pro Home APP and Amazon Alexa
APP.
Step 1. Search for “Thermo Pro Home“ on the Apple Store for IOS devices or on the
Google Play Store for Android devices. Download the App and install it on your
smartphone.
Step 2: Open the Thermo Pro Home App, and you will be asked to register a Thermo
Pro account.
Step 3: Once your account is setup, power on the Thermo Pro
thermometer/hygrometer device and follow the instructions in the APP to add the
sensors.
Please note:
1. The device can be added via two pairing modes, EZ mode and AP mode. You
should try using EZ mode first to add the device. If you have trouble in adding
devices using EZ mode, then switch to using AP mode to add the devices.
2. Currently, these devices only support 2.4GHz Wi-Fi network. Do NOT select a
5Ghz Wi-Fi network.
Step 4: You may add as many devices as you wish but ensure you name them
different names. For example, you can place one device in the master bedroom and
name that device, Master Bedroom.Another device in living room and name that
device, Living Room.
Step 5: Search the Google Play Store or Apple App Store for an APP called “Amazon
Alexa” and install it onto your smartphone. If your smartphone already has Amazon
Alexa APP installed, please skip this step.
Step 6. Open the Amazon Alexa APP and search for the Skill called “Thermo Pro”
and ENABLE this Skill. After you press ENABLE, it will ask you to enter your Thermo
Pro Home APP account ID and password. If done successfully, “Thermo Pro has
been successfully linked” should appear. If you couldn’t successfully link the device,