USER MANUAL BLE & ANT Heart Rate Monitor English V0.
Product Introduction Thank you for purchasing this product, this is a heart rate monitor with wireless Bluetooth and ANT+ functions, it can transmit heart rate data to your receiving device and sports health App in real time via Bluetooth or ANT+, so that you can manage your exercise more scientifically. And the IP67 waterproof can effectively prevent sweat from the device during exercise. This manual can guide you how to use the product, please keep it for reference.
How to use Notice: When the heart rate monitor is not worn, it will be off and enter sleep mode and cannot be searched. Once the heart rate monitor is worn correctly, it will be automatically turned on and work. Wearing 1. Moisten the electrode areas of the chest strap. 2. Attach the connector to the chest strap, pay attention to distinguish the left and right. L R 3.
Heart Rate Zone LED Color LED Once the heart rate monitor is worn correctly, it will be automatically turned on and the LED will flashes white (Heart rate alarm function is turned on: When the device is turned on, it will not beep. Heart rate alarm function is turned off: When the device is turned on, it will beep).
Charging 1.For the first time using the device, it may need to be charged before it can be turned on. 2.Please use DC 5V power adapter to charge the device. 3.The LED shows red during charging, shows green after fully charged. Put the heart rate monitor on the charging base Connect the charging cable to the port of the charging base Connect the charging cable to USB DC 5V power adapter Compatible with multiple Apps MooFit / Endomondo / Sports Tracker / Runtastic / Wahoo Fitness Applicable Models: IOS7.
FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.