说明书成品尺寸:105*145MM 颜色:4色印刷印刷 说明书成品尺寸:105*145MM 颜色:4色印刷印刷 李 民振20191223 材质:80g书纸 工艺:骑马钉 说明书 8217KL 中性 新版本 变更时间 其他:18P 说明: 变更前 材质:80g书纸 电子档1:1 工艺:骑马钉 其他:18P 1.
Model No.
Product structure Introduction Thank you for choosing our baby monitor. Please read the instruction carefully in case of product damage due to improper operation. 1 2 6 3 Parts in the package 5 4 7 1. Photo sensitive sensor 4. Indicator 2. Lens 5. Power interface 3. Microphone 6. Temperature sensor 7. SET button 08 Camera Monitor 09 Manual 10 11 12 13 14 15 16 18 Power adapter x2~3 01 Power cable x2~3 17 08. Antenna 13. Music play button 18. RESET button 09. ON/OFF/Eco mode 14.
Message push icon Using the Monitor No signal connection between the receiver and the camera Signal strength between the receiver and the camera Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the camera lens toward the area you want to monitor. The Lullaby function is enabled. The sleep setting of the receiver is enabled.
Preparation before using camera Preparation before using receiver 1. Powering the Camera Unit 1.Power on the receiver (The receiver is provided with a lithium battery, if the receiver has enough power, please go directly to the Step 2). Insert one end of the included charging cable into the USB jack on the back of the camera. Insert one end of the charging cable into the USB charging jack on the side of the receiver. Insert the other end into the included power adapter.
Receiver function settings Functions of the Babysitter is user definable, to best satisfy your demands. Audio and temperature alarms may offer automatic notification to you. This chapter will introduce the user-definable settings item by item. Camera settings (camera pairing and deletion) Add camera Access receiver menu 1. Select In states of live view, press MENU button on the monitor can enter into MENU list; 2. Select the channel to be paired, and press OK to confirm.
Delete camera Alarm settings 1. Select Sound sensitivity settings Camera, and press OK to enter the function. 2. Select the channel to be deleted, and press OK to confirm. Then select “Delete Camera” and press OK to confirm. Set the sound sensitivity alarm range. This function identifies the volume of the baby's crying. When it is above the set threshold, the receiver will sound an alarm. 1. Select Alarm Settings, press OK to enter the settings page, and select “Sound Sensitivity” settings.
Alarms settings Language selection You can set the feeding alarm to prevent you from forgetting to feed your baby as busy or for other reasons, which may affect your baby's healthy growth. Switch language displayed on the receiver. 1. Select 1. Select Settings, and press OK to enter the settings page. 2. Select Language Settings, and press OK to enter the settings page. Select a Alarm Settings, press OK to enter the settings page and select “Alarms” Settings. 2.
Specifications Restore to default settings Restore the receiver to default settings. Camera 1. Select Settings, and press OK to enter the settings page. 2. Select Restore to Default Settings, and press OK to enter the settings page. 1/6.5" CMOS Image sensor 640*480P Video resolution Viewing Angle 50±5° 3. The device will prompt “Restore to default settings?”. Select YES and press OK to Rotation angle confirm. The device begins to execute a factory reset.
CE and FCC Certification Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.