Model No.
Product structure Introduction Thank you for choosing our baby monitor. Please read the instruction carefully in case of product damage due to improper operation. 1 2 6 3 Parts in the package 5 4 7 7. SET button 1. Photo sensitive sensor 4. Indicator 2. Lens 5. Power interface 3. Microphone 6. Temperature sensor 8 Camera Monitor Manual 18 19 20 10 1 1 11 13 12 15 14 17 16 21 9 08. Antenna 13. Music play button 18. Turn left/Volume- 19. UP/Brightness+ 14. Talk (long press)/ 20.
Message push icon Using the Monitor No signal connection between the receiver and the camera Signal strength between the receiver and the camera Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the camera lens toward the area you want to monitor. The Lullaby function is enabled.
Preparation before using camera Preparation before using receiver 1. Powering the Camera Unit 1.Power on the receiver (The receiver is provided with a lithium battery, if the receiver has enough power, please go directly to the Step 2). Insert one end of the included charging cable into the USB jack on the back of the camera. Insert one end of the charging cable into the DC charging jack on the side of the receiver. Insert the other end into the included power adapter.
Receiver function settings Functions of the Babysitter is user definable, to best satisfy your demands. Audio and temperature alarms may offer automatic notification to you. This chapter will introduce the user-definable settings item by item. Camera settings (camera pairing and deletion) Add camera Access receiver menu 1. Select In states of live view, press MENU button on the monitor can enter into MENU list; 2. Select the channel to be paired, and press OK to confirm.
Delete camera 1. Select Camera, and press OK to enter the function. 2. Select the channel to be deleted, and press OK to confirm. Then select “Delete Camera” and press OK to confirm. Note: (1) Low sensitivity: infants need to make a lot of sounds before using VOX function, which will be activated. High sensitivity: The baby does not need to make many sounds to activate the VOX function. (2) Sound switch button: Enable VOX function; Select any sound sensitivity button.
Alarm clock settings 3. You can also play music quickly through the music play button on the panel. You can set the feeding alarm to prevent you from forgetting to feed your baby as busy or for other reasons, which may affect your baby's healthy growth. 1. Select Alarm Settings, press OK to enter the settings page and select “Alarm” Settings. Other settings Time settings 2.
Specifications Restore to default settings Restore the receiver to default settings. 1. Select 2. Select Camera 1/4",CMOS Image sensor Settings, and press OK to enter the settings page. Restore to Default Settings, and press OK to enter the settings page. 3. The device will prompt “Restore to default settings?”. Select YES and press OK to 1280*720 Video resolution Viewing Angle 60±5° Rotation angle Pan: 345° Tilt:92° Night visual range confirm. The device begins to execute a factory reset.
FCC Certification lnfo Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.