User Manual

ManualsBrandsShenzhen Haohai Development Technology ManualsComputers & AccessoriesWireless mouse

1.Charge the mouse for about 3 hours before first time

using it.

2.If the mouse is not used for a long time,it will automatically

go to sleep,you can click any button to wake it up.

3.When the mouse is move slowly,check if the battery is

low.It is recommended to charge in time.

4. When the mouse is not connected, please check whether the power

switch at the bottom of the mouse is turned on. Or turn off the mouse

and computer and reconnect.

5.If you are not using the mouse for a long time,please turn

off the power switch manually to save power.

6.Please try to stay away from strong interference sources.

Summary of content (12 pages)

PAGE 1
.Charge the mouse for about 3 hours before first time using it. 2.If the mouse is not used for a long time,it will automatically go to sleep,you can click any button to wake it up. 3.When the mouse is move slowly,check if the battery is low.It is recommended to charge in time. 4. When the mouse is not connected, please check whether the power switch at the bottom of the mouse is turned on. Or turn off the mouse and computer and reconnect. 5.
PAGE 2
1.在第一次使用鼠标之前，给鼠标充电约 3 小时。 2.如果长时间不使用鼠标，它会自动进入睡眠状态，您可以点击任何按钮将其唤醒。 3.鼠标缓慢移动时，检查电池是否电量不足，建议及时充电。 4.当鼠标未连接时，请检查鼠标底部的电源开关是否已打开。或关闭鼠标与电脑，重新连接。 5.如果您长时间不使用鼠标，请手动关闭电源开关以节省电源。 6.
PAGE 3
Thank you for choosing our dual-mode (Bluetooth+2.4G) wireless mouse. If you have any questions, please feel free to contact our customer service team.
PAGE 4
感谢您选择我们的双模式（蓝牙+2.
PAGE 5
PAGE 6
Product Features: ￭ Dual Mode : Bluetooth and 2.4G wireless. ￭ Rechargeable : Built-in rechargeable battery. ￭ Accurate Tracking : Professional IC positioning accuracy. ￭ Silent Click : Soundless design for the right and left buttons. ￭ Auto Sleeping : Be in sleep mode in 8 minutes of inactivity. Charging Instruction: It is recommended to use a computer USB port to charge the mouse, or use a 5V/1A or 2A charger to charge the mouse. Remember not to charge the mouse with a charge above 5V.
PAGE 7
产品特点：￭双模式：蓝牙和 2.4G 无线。￭可充电：内置可充电电池。￭精确跟踪：专业 IC 定位精度。￭无声点击：左右按钮的无声设计。￭自动睡眠：8 分钟不活动后进入睡眠模式。充电说明：建议使用电脑 USB 接口为鼠标充电，或者用 5V/1A 或 2A 的充电器为鼠标充电，切记不要用 5V 以上的充电来充电。充电时滚轮旁边的红色指示灯亮，充满电后熄灭，需要 1-3 小时。 2.4GHz 模式 1. 取出 Nano 接收器（位于鼠标底部）。 2.
PAGE 8
3. Push the "Switch" button to the 2.4G position on the right 4. Move the mouse or tap the left and right buttons to use it normally. Bluetooth Mode Just switch the "switch" button to the BT position on the left, and then the mouse will automatically find the computer's Bluetooth, and the computer will also search for the Bluetooth mouse (BT5.2 Mouse), click it and it will automatically connect and use.
PAGE 9
3. 将“开关”按钮推到右边的 2.4G 位置 4. 移动鼠标或点击左右按钮以正常使用。蓝牙模式：只需将“开关”按钮切换到左边 BT 位置，然后鼠标自动查找电脑蓝牙，电脑也会搜索到蓝牙鼠标（BT5.
PAGE 10
iPad Instructions: 1. Update the system to iOS 13 or above,and open the device's Bluetooth function. 2. Open Settings—Bluetooth—Turn on Bluetooth 3. The device Bluetooth searches for "BT5.2 Mouse" and then clicks it to connect and use it Note: 1. Please input"no code"or 0000"when a four-digit code is required. 2. 2. It has been used on the A device.
PAGE 11
iPad 使用说明： 1. 将系统更新为 iOS 13 或更高版本，并打开设备的蓝牙功能。 2. 打开设置—蓝牙—打开蓝牙 3. 设备蓝牙搜索“蓝牙鼠标”（BT5.2 Mouse）然后单击它能连接使用了注: 1. 如果需要四位数代码，请输入“无代码”或“0000”。 2. 已在 A 设备上使用，如果想在 B 设备上使用就要把 A 设备的蓝牙关闭，鼠标需要重新启动，然后进行自动搜索 B 设备的蓝牙了。 3. 如果连接失败，请删除所有配对的蓝牙设备，重新启动计算机，关闭鼠标，然后根据“蓝牙模式指南”重新连接鼠标 4. 请不要太靠近“WI-Fl 路由器”或其他无线信号传输设备以避免干扰。 FCC Warning This device complies with part 15 of the FCC Rules.
PAGE 12
responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.