{ 1. Welcome 2. Safety Instructions 3. Product Components 4.Instructions for Use 5.Product Maintenance 6.Common Faults) C Dung all debris from the dust box into the garbage. ) ( Remove the per-filter. ) Se Te ree Diameter of main body Thickness of main body Net wait of main body 330 mm 75 mm 3.
{ 1. Welcome 2. Safety Instructions 3. Product Components 33 Practiced Characteristics Humanized Design It Is shingle to operate. You can contra the robot only by pressing the Control button! Follow the prompt tone to operate the robot! Dust box can be washed with water The dust box and the per-filter can be directly flushed with water without too much labor, which can avoid secondary pollution caused by dust flying! Cao 4.Instructions for Use © aes wl Sing ie 6. Common Faults 5.
4 1. Welcome 2. Safety Instructions 3. Product Components Lee 00 5 Product Maintenance 8,Common Faults, CT me re ——(O =| Power On/Off 88:88 Display Screen Plan Cleaning | fil] Re tum for Auto Plan Cleaning rau Charging The robot will perform the smart Plan Cleaning Confirm.
{ 1. Welcome 2. Safety Instructions 3. Product Components A Forward + At the standby made, press this button to continue moving forwards, and release ito return to the standby mode. £% the Preset mode or the Time Settings mode, press this button to increase the number, V Backwards /At the standby mode, press this button to continue moving backwards, and release it to return to the standby mode. Ab the Preset mode or the Time Settings mode, press this button to decrease the number.
( 1. Welcome 2. Safety Instructions 3. Product Components Charging Instructions 01.The battery should be repaired and replaced by the after sales department. §2.For the very first operation, please let the robot run out of power, {3.When the robot is charged, the Control button will flash a green lamp in a circular manner, O4. If the robot is out of service for 2 long time, please turn off the power switch. U5. Please charge the robot as soon as possible after the battery 1s used up. 08.
{ 1. Welcome 2. Safely Instructions 3. Product Components Charging Modes At any mode, select the Re tum for Auto Charging button on the remote control io make the robot re fum for charging. Auto Charging When cleaning Is completed or the battery is too low, the robot will automatically start finding the charging base to charge itself. Please keep the charging base energized, otherwise the machine will not be able to find the charging base. Product Maintenance 6. Common Faults, Switching Modes Startup {1.