User Manual

3: Using

Using

Using method

method

3.1: Bluetooth pairing connection

3 ． 1 ． 1 ： The first paring connection: Turn on press " POWER /ID ” button for 5

seconds ,you can see the red and blue lights continuous rapid flashes about 2 times

Continue to hold it about 2 seconds untill the red.blue lights flashing alternately ， at

this time the machine is forced into pairing mode.

3 ． 1 ． 2 ： You will need to pair the other equipment,make it into pairing mode. Refer to

your BT adapter manual

3 ． 1 ． 3 ： When you searching the device, showed "FH-011" ,if prompting, you need to

input the password or PIN and input "0000" ,when the blue lights is blinking rapidly for

several times ,that's in pairing mode.

3 ． 1 ． 4 ： If two device have matching before ， when press “ POWER /ID ” for 5

seconds next pairing , see the red and blue lights at the same time,release the button,

this to be automatic matching with another bluetooth equipment,when the red and blue

lights continuous rapid flashes two times, pairing successfully .if there is no automatic

matching connection, pairing again.

3 ． 1 ． 5 ： Turn off ， press “ POWER /ID ” for 4 seconds, untill seeing the red, blue lights

quik flashing alternately for two times and then release the button.

3.2: Charging and state instructions

The equipment with Micro-USB to connect 5V DC power charging (can not support

data connection. When charging, the red indicator display. About two hours,charging is

over. The red indicator out automatically.

3.3: Audio output connection

When the bluetooth pairing successfully, can receive the audio signal from the

bluetooth equipment, From the 3.5mm stereo output audio signal, 3.5mm stereo can

connect with headphones or audio output interface .

4 ． Bluetooth

Bluetooth

Bluetooth feature

feature

Bluetooth compatible: V3.0+EDR 。 compatible with 1.1, 1.2, 2.0 or 2.1 version

Bluetooth transmission distance ≥ 10M

RF Frequency ： 2402 – 2480 MHZ ；

Continuous Play time ： 6-8 hours

Standby time ： 120-150 hours