User's Manual

iSmartTool Series User Manual

then release it, the system will change into the target language.

2.5 Network Setup

The tool has built-in Wi-Fi that can be used to get online. Once you’re online,

you can register your tool, surf the Internet, send email, SMARTSAFE the

remote diagnosis, and check for software updates etc.

5. On the home screen, tap Tablet Settings -> Network & Internet -> Wi-Fi.

6. Slide the Wi-Fi switch to ON, the tool starts searching for available wireless

networks.

7. Select a wireless network to connect. When Connected appears, it indicates

the Wi-Fi connection is complete.

Note: When Wi-Fi is not required, this should be disabled to conserve battery

power.

2.6 Register & Download Diagnostic Software

Tap Login on the upper right corner of the Job menu, the following login popup

will appear on the screen.

(If you are a new user, follow A to proceed.)

(If you have registered to be a member, go to B to login the system directly.)

(In case you forgot password, refer to C to reset a new password.)

A. If you are a new user, tap New Registration and follow the on-screen

instructions to finish the registration.

1. Create App account: Fill in the information in each field (Items with * must be

filled). After inputting, tap Register.

2. Activate VCI: Input the 12-digit Product Serial Number and 8-digit Activation