User's Manual

iSmartTool Series User Manual

A. Opel, Volkswagen, Audi

B. Honda

C. Volkswagen

D. Opel, Volkswagen, Citroen

E. Changan

F. Hyundai, Daewoo, Kia, Honda, Toyota, Nissan, Mitsubishi, Renault, Opel, BMW,

Mercedes-Benz, Mazda, Volkswagen, Audi, GM, Chrysler, Peugeot, Regal, Beijing

Jeep, Citroen and other most popular models

If the DLC cannot be found, refer to the vehicle’s service manual for the location.

3.2 Vehicle Connection

Follow the steps mentioned below to connect OBD II vehicle:

Connect one end of the included diagnostic cable to the DB15 diagnostic

connector, and the other end to the vehicle’s DLC port.

For non-OBDII vehicle, proceed as follows:

1. Select the corresponding adaptor cable according to the vehicle’s DLC type.

2. Plug the non-16pin end of the adaptor cable into the vehicle’s DLC port, then

connect the other end to the OBD I adaptor, and then tighten the captive

screws.

3. Connect the other end of the OBD I adaptor to the diagnostic cable.

Note: If the pin of the DLC is damaged or the DLC has insufficient power, you can

get power via the Cigarette Lighter Cable: Plug one end of the cigarette lighter cable to

the vehicle’s cigarette lighter receptacle, and other end to the DC port of the OBD I