User's Manual

iSmartTool Series User Manual
12
adaptor.
3.3 Start Diagnostics
Tap a corresponding diagnostic software logo, and then follow the on-screen
instruction to access the diagnostic software.
Take Demo (Version 15.32) as an example to demonstrate how to diagnose a
vehicle.
1).Select diagnostic software version: Tap the DEMO to go to Step 2.
2). Select vehicle model (varies with different versions): Select the desired
vehicle model. Here we take TOYOTA for example to demonstrate how to
diagnose a vehicle.
3). Turn the ignition key to ON: Set the ignition switch to on.
4). Read vehicle information: After reading the vehicle information, double check
if the vehicle information is correct or not. If yes, tap Yes to continue.
5). Select test item: Select the desired test item to proceed.
1. Health Report (Quick Test)
It enables you to quickly access all the electronic control units of the vehicle and
generate a detailed report about vehicle health.
Tap Health Report, the system will start scanning the ECUs. Once the scanning
process is complete, the following screen will appear: