User's Manual

iSmartTool Series User Manual

the tool alongside the valve stem.

2. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the

tire and place the tool alongside the stem while tapping Active.

5.2 Program TPMS Sensor

This function allows users to program the sensor data to the specific sensor and

replace faulty sensor with low battery life or one that is not functioning.

There are three options available for programming the sensor: Auto Create,

Manual Create and Copy by Activation.

Note: Do not place the device close to several sensors at the same time, or the

diagnostic tool will detect more sensors, which may result in programming failure.

Method 1 – Auto Create

This function is designed to program the specific sensor by applying random IDs

created according to the test vehicle when it is unable to obtain the original

sensor ID.

1. Select the wheel which needs to be programmed on the tool, place a sensor

close to the TPMS antenna of the tool, and tap Auto to create a new random

sensor ID.

2. Tap Program to write in the new created sensor ID to the sensor. The tool

starts programming until the programming process is finished.