User Manual

2 5
2 6
Instruction Mannual
58MM Portable MINI Thermal Printer
10. Serial (COM) port to be used
1. Open the Printer Properties screen, and then select the "Port" item, as shown
below:
2.Select the list of ports "COM1" → " Configure Port", the printer factory
default settings as shown below:
You can see the setting parameters of serial port from self-test page, Click
"Apply", then click "OK" (Note: This setting must consistent with the setting
parameters of serial port from the printer self-test page, otherwise it will be
garbled case) appears as shown below:
115200