User Manual

2 7
2 8
Instruction Mannual
58MM Portable MINI Thermal Printer
Click "Apply" again.
3.Return to the "General" tab, click "Print Test Page" as shown below:
If the printer prints a normal page, then it shows that the work was successful.
If you feel the print speed is slow, please click on the "Device Settings" →
"Print Mode" → Choose "soft font" button as shown below:
11.Cleaning of printer head
Cleaning of printer
The printer does not print clearly and the thermal paper is Ok.
The printer Print pages lengthways is not clear
It’s getting too noisy while feeding paper or printing.
When the printer has the following conditions, you should clean
the printer head:
1
2
3
Printer head cleaning steps are as follows:
1. Power off the printer and open the paper room cover. Remove the
thermal paper roll.
2. If the printer just finished printing , please wait for the print head to
cool down.
3. With a soft cotton cloth dipped in ethanol (please make sure there is
no dripping), wipe the thermal printer head gently and remove any
dust or stains.
4. Wait for the complete evaporation of any ethanol, then place the
thermal paper roll back in the printer and close the paper room cover,
then print a test page.
Notes：
When the printer maintenance must ensure that the power is shut down
Hands or other metal tools away from the surface of the printer head,
do not u se tweezers to scratch the surface of the printer head and
other sensitive p a rts.
Do not use gasoline, acetone and other organic solvents for printer
head cleaning.