Operating instructions

Operating manual: Mobile speciality pump Atlantica
SHG SPECHTENHAUSER HOCHWASSER- UND GEWÄSSERSCHUTZ GMBH
Gewerbestraße 3, D-86875 Waal, Germany www.spechtenhauser.de
Tel.: [phone] [e-mail]
Fax: [phone].02.14 [5]
19
7 Problems / faults
Malfunctions, causes and fixes
Problem
Cause
Remedy
Engine does not run, stops No petrol Check the fill level.
Check the power cable for damage.
Defective power line. Check the power cable (ignition).
Overheated engine temperature. Allow the engine to cool down and
start it after resetting the electronics.
If it happens again, the engine is to
be checked by Spechtenhauser Cus-
tomer Service
Leaking engine The engine is to be checked by
Spechtenhauser Customer Service.
The engine runs, the pump does
not pump
Pump or hose blocked Clean the pump or the hose.
Air in the pump. When using the suction cover, en-
sure that the suction hose and pump
are filled with water. All couplings
must be sealed. Ensure that the
check valve closes trouble-free.
Pumping power too low Pressure loss in system to high. Remove the kink in the hose or use a
hose with a larger diameter.
Flow rate too high Connect a second Atlantica in series;
so one after the other.
Hose blocked! Remove the blockage in the hose.
Viscosity of the pumped liquid
too high.
Use a more powerful pump.
The pumping liquid is too thick Thin the liquid, if possible, or use a
more powerful pump.
Please refer to the Engine Subaru User Manual in case of faults and problems on the engine.
Should you have any further questions, please contact our Customer Service.