User's Guide

Gcube Series Receipt Printer

WARNING : Make sure that you use the power supply provided with the printer or

equivalent.

CAUTION : When connecting or disconnecting the power supply from the printer,

make sure that the power supply is not plugged into an electrical outlet.

Otherwise you may damage the power supply or the printer.

If the power supply’s rated voltage and your outlet’s voltage do not match, contact

your dealer for assistance. Do not plug in the power cord. Otherwise, you may

damage the power supply or the printer.

1. Make sure the printer is turned off.

2. Plug the DC cord connector into the power jack on the printer. If it is

necessary to connect the interface and the drawer, plug that connector

into the port on the printer. And clean up the cables.

↑ UP

➊

➌

➋

➍

NOTES : To remove the DC cable connector, make sure the power supply’s power cord

is unplugged and then grasp the connector at the arrow and pull it straight out.

1.5. Connecting the Power Supply