User's Guide

OPERATOR’S Manual
15
CHAPTER 1
1.7. Adjustments and Settings
1.7.3 Bluetooth setting
1. Run a Smart BT Linke.
2. If the message “Tag on Gcube” appears in the middle of screen, then tag
a smart phone on Printer.
3. Change the Device Address, Device Name, Pin Code and click the Create
button.
4. When the message “Tag on Gcube” appears in the middle of screen,
then tag a smart phone on Printer.
5. When the setting is well done, printer will print Self-Test Page after
reset.
➊
➌
➋
➍