Use and Care Manual

EB600RT ASSEMBLY
X7505200806 17
© 11/19 ECHO Incorporated
Note: Anti-static wire prior to
assembly.
2. Route anti-static wire below fan
housing and clip wire into
throttle cable retaining clip (X).
Position wire outside blower
elbow.
3. Insert anti-static wire through
flex tube. Leave enough slack
in anti-static wire to allow for full
rotation of elbow.
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower
elbow.
4. Assemble flexible pipe (B) to
elbow (D) on blower. Position
clamp with cable guide loop (G)
on outside of flexible pipe (B)
and tighten clamp.
X
D
G
A
B
E
F
C
H