Use and Care Manual

OPERATION EB600RT

24 X7505200806

Starting Warm Engine

The starting procedure is the same

as Cold Start except DO NOT close

the choke.

1. Throttle Lever

Move throttle position lever (A)

to IDLE position.

2. Purge Bulb

Pump purge bulb (C) until fuel is

visible. Pump bulb an additional

4 or 5 times.

3. Recoil Starter

Pull recoil starter handle (D) and

engine should start. Do not use

choke (B)

Note: If engine does not start

after 5 pulls, use cold

start procedures.

Stopping Engine

1. Throttle Lever

Release throttle trigger. Move

Throttle Lever (A) forward to idle

position and allow engine to

return to idle before shutting off

engine.

2. Throttle Lever

Move Throttle Lever (A) all the

way forward to STOP position.

If engine does not stop when stop switch is moved to STOP

position, close choke - COLD START position - to stall engine.

Have your Shindaiwa dealer repair stop switch before using unit

again.