Use and Care Manual

EB770RT ASSEMBLY
X7531127000 17
© 10/19 ECHO Incorporated
2. Insert anti-static wire (I) through
flexible pipe (B).
Note: A light lubricant may be
used to ease assembly of
flexible pipe to blower
elbow.
3. Assemble flexible pipe to elbow
(D) on blower. Position clamp
with cable guide loop (G) on
outside of flexible pipe and
tighten clamp.
Note: Hang handle freely from
blower to assure throttle
cable is not twisted before installing handle (E).
4. Position throttle cable along the
outside of elbow. Loosen knob
(H) on handle (E). Align notches
in handle with tabs (F) and install
onto swivel pipe (C) past long
ridges in pipe.
5. Insert anti-static wire through
swivel pipe
6. Assemble swivel pipe into flexible
pipe and tighten clamp (A).
7. Clip throttle cable into throttle
cable guide loop (G).
C
D
B
I
G
C
F
C
C
E
C
H
C
A