Use and Care Manual

OPERATION EB770RT

18 X7531127000

8. Move handle (E) to desired

position. Tighten knob (H) hand

tight.

9. Assemble straight pipe (J) onto

swivel pipe (C), until you feel light

resistance. Do not force

connection. Hold swivel pipe and

turn straight pipe clockwise,

engaging positive locking

channels, until connection is firm.

Do not force connection.

10. Assemble straight pipe with

decal (K) to straight pipe as in

step 9.

Note: Blower use will eventually

loosen pipe connections.

Exclusive positive locking system allows pipes to be

tightened. If loosening occurs, remove two straight pipes and

install according to instructions 9 &10.

OPERATION

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

Always stop engine, disconnect spark plug, and make sure all

moving parts have come to a complete stop before removing

obstructions, clearing debris, or servicing unit. Blower housing

may contain shredder blades and other sharp edges that can

cause serious injuries if touched, even if engine is off and

blades are not moving. Wear gloves to protect hands from sharp

edges and hot surfaces.