Use and Care Manual

OPERATION EB770RT

24 X7531127000

2. Pump purge bulb (D) until fuel is

visible. Pump bulb an additional

4 or 5 times.

3. Pull recoil starter handle (E) and

engine should start. Do not use

choke (C)

Note: If engine does not start

after 5 pulls, use cold start

procedures.

Stopping Engine

1. Throttle Position Lever

Release throttle trigger. Move

Throttle Position Lever (A) forward

to idle position and allow engine to

return to idle before shutting off

engine.

2. Throttle Position Lever

Move Throttle Position Lever (A)

all the way forward to STOP

position.

If engine does not stop when stop switch is moved to STOP

position, close choke - COLD START position - to stall engine.

Have your dealer repair stop switch before using unit again.

Operating Blower

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a

poison gas. Breathing CO can cause unconsciousness, serious

injury, or death. Exhaust can cause serious burns. ALWAYS

position unit so that exhaust is directed away from your face

and body.