Use and Care Manual

EB770RT MAINTENANCE

X7531127000 29

1. Close choke (COLD START( ) position). This prevents dirt from

entering the carburetor throat when the air filter is removed. Brush

accumulated dirt from air cleaner area.

2. Remove air filter cover, air filter, retainer, and foam pre-filter. Brush dirt

from inside cover.

Foam Pre-Filter:

• Clean foam filter (A) in water/

detergent solution and rinse

with clean water.

• Wrap the filter in a clean, dry

cloth and squeeze (do not

wring) dry. Allow to dry

completely before reuse. Do not

oil.

Air Filter:

• Lightly brush debris from air filter (B).

• Replace filter if it is damaged, very dirty, or the rubber sealing edges

are deformed.

• If filter can be reused, be certain it fits tightly in the air filter cavity, and is

installed with the original side out.

3. Assemble components in reverse order.

Fuel Filter

Level 1.

Fuel is VERY flammable. Use extreme care when mixing, storing

or handling, or serious personal injury may result.

Parts Required: Tune Up Kit.