Owner's Manual

Table Of Contents

T3000 ASSEMBLY

X7508162400 17

Support Handle Installation

Note: Label shows minimum spacing for support handle

location.

1. If necessary, position support handle for comfortable

operation and securely tighten screws.

Battery Installation

The attachment will operate when the battery is installed, the

power indicator LED is lit, and the trigger and trigger lockout

are engaged. Make sure the trimmer is properly positioned to

prevent loss of control and possible serious injury. Keep

movable parts of the attachment off the ground and away from

objects that could become entangled or thrown.

Note: The battery comes partially charged from the factory and

needs to be fully charged before first use.

1. Make sure power to unit is turned off.

Note: Unit shipped, with battery attached to power head with

battery spacer. Remove screw (D), and remove battery

spacer (E) for initial battery installation.

2. Align ridges (A) on battery pack with grooves in power head.

Slide battery pack into power head.

Assure the battery pack latch (B) snaps into place and battery pack is secure before beginning operation.

3. To remove battery, depress battery pack latch release (C) slide battery pack out of power head.