Owner's Manual

Table Of Contents

T3000 OPERATION

X7508162400 19

Starting Cordless Electric Trimmer

The attachment will operate when the battery is

installed, the power indicator LED is lit, and the

trigger and trigger lockout are engaged. Make sure

the trimmer is properly positioned to prevent loss of

control and possible serious injury. Keep movable

parts of the attachment off the ground and away

from objects that could become entangled or

thrown.

1. Push power button (A) once to turn on power to unit.

Note: Power indicator LED (B) illuminates when power

to unit is turned on.

2. Hold down throttle trigger lockout (C) and depress

throttle trigger (D) to increase RPM to operating

speed.

Stopping Cordless Electric Trimmer

The cutting attachment continues to run for a short period after the unit is switched off.

1. Release throttle trigger and throttle trigger lockout,

and allow trimmer head to stop.

2. Push power button (A) to turn off power to unit.

Note: Power indicator LED (B) turns off when power to

unit is turned off.

If the power button does not stop the trimmer,

remove the battery to stop the power supply to

trimmer. Have your authorized Shindaiwa servicing

dealer repair power button before using trimmer

again. If the trimmer head does not stop when the

trigger and trigger lockout are released, remove the

battery to stop the power supply to trimmer. Have

your authorized Shindaiwa servicing dealer repair

unit before using again.

When power to the unit is turned on:

• After ONE minute of inactivity, unit will power itself off.

• If the LED remains lit, operation is normal.