Owner's Manual
Table Of Contents
- T3000 (with battery and charger) T3000W (without battery and charger) CORDLESS GRASS TRIMMERS
- Table of contents
- Introduction
- Servicing Information
- Safety
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Disposal
- Specifications
- Warranty Statements
- Notes
- Product Registration
- Notes
22 X7508162400
© 07/2016 ECHO Inc.
MAINTENANCE T3000
4. Hold trimmer head while turning knob clockwise to wind line
onto spool until about 5” (13 cm) of each line remains
exposed.
Trimmer head is now fully loaded and ready for operation.
When the wear indicators located at the bottom of the
Speed-Feed® head are worn smooth, or if holes appear,
replacement of the cover or the entire Speed-Feed® head is
required.
Battery Removal
1. Release throttle trigger and throttle trigger lockout and allow
trimmer head to stop.
2. Make sure power indicator LED is not illuminated.
3. Depress battery pack latch release (C) slide battery pack out
of power head.
Cleaning Battery and Battery Compartment
1. Remove battery and use compressed air or a soft bristle
brush to remove debris from battery and battery
compartment.
Risk of electric shock or fire. Do not use conducting materials to clean battery or battery
compartment.
Charging Battery
• Keep charger and battery away from damp conditions and all liquids.
• Connect the charger only to 120V AC outlet.
• Never insert objects in the battery pack's or charger's cooling slots(A).
Wear Indicators
A
B
C