Owner's Manual

Table Of Contents

T3000 MAINTENANCE

X7508162400 23

Note: The battery comes partially charged from the factory and needs to be fully charged before first use.

Note: Charge the battery when it no longer produces sufficient power to operate the trimmer or when battery

lights indicate that the battery is low.

1. Plug charger AC cord into 120V AC outlet..

2. Align ridges on battery with grooves on charger, and slide

battery into charger.

3. During normal charging, the charger LED (B) will blink

continuously GREEN.

If charger detects a problem, LED blinks RED. Remove battery

from charger, clear obstructions from contacts and reinstall

battery into charger. If battery is outside acceptable temperature

range (0°C to 60°C or 32°F to 140°F) LED remains RED.

4. When charging is complete, LED will remain GREEN.

Note: A fully discharged battery pack will charge in about 72 minutes.

5. Verify battery is fully charged by removing battery from

charger, then pressing battery charge status button (C), and

checking LED display (D).

• 1 green light indicates that the battery has 0-25% charge.

• 2 green lights indicate that the battery has 25-50% charge.

• 3 green lights indicate that the battery has 50-75% charge.

• 4 green lights indicate that the battery has 75-100% charge.

6. Disconnect battery charger from power supply.