Use and Care Manual

Introduction
The Model D3757 Universal Mobile Base Kit (shown in
Figure 1) allows you to build a custom mobile base to fit
nearly any machine.
Inventory (Figure 2) Qty
A. Corner Brackets with Wheel .............................2
B. Top Plates ...................................................4
C. Corner Brackets with Pedal & Caster ..................2
D. Fasteners (Not Shown)
—Flat Head Screws M8-1.25 x 30...................... 12
—Flat Washers 8mm ..................................... 12
—Lock Washers 8mm .................................... 12
—Hex Nuts M8-1.25 ...................................... 12
Specifications
• MinimumBasePlateSize ....................... 12" x 12"
• MaximumBasePlateSize(with
3
⁄4" Base) ... 36" x 36"
• MinimumBasePlateThickness .......................
1
⁄2"
• MaximumBasePlateThickness .................... 1
1
⁄2"
• MaximumWeightCapacity ....................... 600 lbs
Items Needed for Assembly
• Plywood
3
⁄4" Thick (see note below) ...SizeasNeeded
• DrillPressorHandheldDrill .............................1
• DrillBit
3
⁄8" .................................................1
• PhillipsScrewdriver#2 ...................................1
• WrenchorSocket12mm .................................1
• MeasuringTape.............................................1
• TableSaworCircularSaw ...............................1
• Pencil ........................................................1
Note: The fasteners included with this kit are sized
for a
3
⁄4" base plate. A different thickness of base
plate can be used, but you will need to supply a dif-
ferent length of flat head screws.
Figure 1. Model D3757.
Figure 2. Inventory.
A
C
B
COPYRIGHT © MAY, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in China#12902TR
Model D3757
UNIVERSAL MOBILE BASE KIT
Instruction Sheet
Phone#:(360)734-3482•OnlineTechSupport:[e-mail]•Web:www.shopfox.biz
Base Plate Material
The best material for the base plate is a
natural wood plywood (hardwood plywood
isbest).AvoidusingOSB,MDF,orparticle
board,asthesematerialsaregenerallynot
strongenoughtoholdheavymachineryfor
alongperiodoftime.
Operating machinery on an
unsecured mobile base may allow the
machine to shift unexpectedly, which
could result in accidental contact
with the cutting device or other
moving parts.