Owner's Manual

Troubleshooting
Issue Indicator Status Solution
No sound or faint sound
Receiver ready LED on • Verify all sound system connections or adjust gain
as needed (see Adjusting Gain)
• Verify that the receiver is connected to mixer/
amplifier
Receiver ready LED off • Turn on transmitter
• Make sure the batteries are installed correctly
• Perform transmitter setup (see Single System
Setup)
• Insert fresh batteries
Receiver LED screen off
• Make sure DC adapter is securely plugged into
electrical outlet.
• Make sure receiver is powered on.
Transmitter indicator LED Replace transmitter batteries (see Changing
flashing red
Batteries).
Audio artifacts or dropouts
Ready LED flickering or off • Change receiver and transmitter to a different
group and/or channel.
• Identify nearby sources of RF interference, and
shutdown or remove source.
• Replace transmitter batteries.
• Ensure that receiver and transmitter are positioned
within system parameters
• System must be set up within recommended range
and receiver kept away from metallic surfaces.
• Transmitter must be used in line of sight from re.
ceiver for optimal sound
Distortion
Audio LED on receiver indi· Reduce transmitter gain (see Adjusting Gain).
cates overload (red)
Sound level variations when N/A
Adjust transmitter gain as necessary (see Adjusting
switching to different sources
Gain).
Receiver/transmitter won't LED/display flashing rapidly See Locking and Unlocking Controls.
turn off
7