Quick start Guide

Shure Incorporated

16/26

Issue Indicator Status Solution

Transmitter indicator LED

flashing red

Replace transmitter batteries (see Changing Bat

teries).

Audio artifacts or dropouts Ready LED flickering or off • Change receiver and transmitter to a different

group and/or channel.

• Identify nearby sources of RF interference, and

shutdown or remove source.

• Replace transmitter batteries.

• Ensure that receiver and transmitter are posi

tioned within system parameters

• System must be set up within recommended

range and receiver kept away from metallic sur

faces.

• Transmitter must be used in line of sight from

receiver for optimal sound

Distortion Audio LED on receiver indi

cates overload (red)

Reduce transmitter gain (see Adjusting Gain).

Sound level variations

when switching to different

sources

N/A Adjust transmitter gain as necessary (see Adjust

ing Gain).

Receiver/transmitter won't

turn off

LED/display flashing rapid

See Locking and Unlocking Controls.

Specifications

System

Working Range

91 m (300 ft) Line of Sight

Note: Actual range depends on RF signal absorption, reflection and interference.

Audio Frequency Response

50 to 15,000 Hz

Note: Dependent on microphone type

Total Harmonic Distortion

Ref. ±33 kHz deviation with 1 kHz tone

0.5%, typical