PSM®900 Personal Monitor System User Guide level L R menu sync volume power R menu sync sync volume power CLIP level L CLIP sync Pat. 6597301; Pat. App. Pending Pat. 6597301; Pat. App. Pending >>SE425 © 2010 Shure Incorporated Printed in U.S.A. 27A12695 (Rev.
ii
ENGLISH WARNING! USING THIS SYSTEM AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE. In order to use this system safely, avoid prolonged listening at excessive sound pressure levels. Please use the fol-lowing guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.
PSM900 The PSM 900 Wireless Personal Monitor System from Shure offers an unprecedented combination of superb audio quality, robust RF performance, and category-leading setup features for the most demanding professional applications. All new, patent-pending CueMode allows the sound engineer to monitor different stage mixes with the touch of a button.
Components Features • Rack unit with mounting hardware and detachable antenna. Frequency Scan The scan feature analyzes the RF environment for interference to identify available frequencies. The PSM900 has two frequency scan modes: • Bodypack with detachable antenna. • Channel Scan Press the scan button on the bodypack. Finds the first available channel. • Group Scan Press and hold the scan button for two seconds. Finds the group with the greatest number of available channels.
Controls and Connectors P9R P9T PSM 900 Transmitter P 9T level L L6E 656-692 MHz menu R sync volume power clip enter exit sync Front Panel Controls ① Input Level Control and Display Use the ▼▲ buttons to adjust the audio so that, for the average input signal level, the top two yellow LEDs flicker and the lower LEDs are solid. The red clip LED indicates the inputs are overdriven. Reduce the level at the audio source or change the input sensitivity of the rack unit from the AUDIO>INPUT menu.
Quickstart Instructions Multiple System Setup Bodypack When setting up multiple systems, designate a single bodypack to scan for available frequencies and download them to all the rack units. Insert batteries and attach antenna. Turn on using the volume knob. The battery light illuminates. Rack Unit 1. Connect to a power outlet using the supplied power adapter. 2. Attach the supplied antenna to the ANTENNA OUT BNC connector. 3.
Configuration Menu Press enter to access settings. After adjusting a setting, press enter to accept the change. Note: Configuration menu items may vary with regional model variations. P9T Rack Unit Transmitter P9R Bodypack Receiver RF Settings RF Settings RADIO G CH 888.888MHz RF POWER Sets the group number Sets the channel number Manual frequency selection Select from 10, 50, or 100 mW (varies by region) Audio Settings AUDIO MODE G Sets the group number 888.
SPECIFICATIONS PSM900 RF Carrier Range 470–952 MHz Note: varies by region Compatible Frequencies Per band: 20 Tuning Bandwidth US: 36–40 MHz varies by region Operating Range (environment dependent) 90 m (300 ft) Audio Frequency Response 35 Hz–15 kHz Stereo Separation 60 dB Signal-To-Noise Ratio (A-Weighted) 90 dB (typical) Total Harmonic Distortion (ref. ±34 kHz deviation @1 kHz) <0.8% (typical) Companding Patented Audio Reference Companding Spurious Rejection (ref.
CERTIFICATION P9T, P9R This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. P9T Certified under FCC Parts 74. (FCC ID: DD4P9TA, DD4P9TB, DD4P9TC, DD4P9TD, DD4P9TJ). Certified by IC in Canada under RSS123 and RSS-102. (IC: 616A-P9TA, 616A-P9TB, 616A-P9TC, 616A-P9TD). Meets essential requirements of European R&TTE Directive 99/5/ EC, eligible to bear the CE mark. Type approved to EN 300 422 Parts 1 and 2.
www.shure.com United States: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Europe, Middle East, Africa: Shure Europe GmbH Wannenäckestr. 28, 74078 Heilbronn, Germany Phone: 847-600-2000 Fax: 847-600-1212 Email: info@shure.com Phone: 49-7131-72140 Fax: 49-7131-721414 Email: info@shure.de ©2009 Shure Incorporated Asia, Pacific: Shure Asia Limited Unit 301, 3rd Floor Citicorp Centre 18, Whitfield Road Causeway Bay, Hong Kong Phone: 852-2893-4290 Fax: 852-2893-4055 Email: info@shure.
