User's Manual

Shure Incorporated
6/21
• 1/4” to mini 4-pin guitar cable (WA302)
Receiver Controls and Connectors
Front Panel
1. audio LED: Indicates strength of incoming audio signal: green for normal, amber for strong and red for clipping.
2. LED Screen: Displays group and channel setting. See "Single System Setup" for details.
3. channel button: Changes group and channel setting. See "Single System Setup" for details.
4. ready LED: Indicates system ready and receiving an RF signal from the transmitter. Also indicates battery level
of the transmitter:
◦ Green = transmitter battery level normal
◦ Red = low battery (typically less than 60 minutes with alkaline batteries)
with NiMH rechargeable batteries, when the indicator turns red there will be little to no remaining life.
5. Infrared (IR) port: Sends IR signal to transmitter for sync.
6. sync button: Press to synchronize transmitter with receiver group and channel settings.
7. AC adapter jack
8. Adapter cord tie-off
9. XLR microphone output jack
10. 6.35 mm (¼") instrument level output jack
Back Panel