Owner`s manual

19
8.2f Clock Setting
Under power-on or stand by status, press to adjust the clock. The hour and minute display
flickers. Press again and the hour display flickers. Use to adjust the hour. Press
again. The minute display flickers. Use to adjust the minutes. Press again to
quit clock adjustment.
CLOCK
ELECELEC
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
8.2e
Press the button for 5s to turn on the water supply pump. The sign will display on the
interface as in picture 1. Press the button again to turn off the water supply pump as in picture 2.
Turning On/Off the Ring Main Water Circulating Pump Manually.
ELECELEC
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
picture 1 picture 2
11
11
11
11
11
11
11
ELECELEC
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
CLOCKCLOCK
TIMERTIMER
8.2g Timer 1 ON/OFF Setting
(Timer 1 turns the heat pump ON/OFF).
Press button for hour, minutes and timing. The ON symbol flickers. Press again, the
hour display flickers. Press the button to adjust the setting of the hour. Press button
again, and the minute display flickers. Press buttons to adjust the minutes. Press
button again and the hour and timer OFF symbol flickers. Press again and the hour display
flickers, press button to adjust the hour setting. Press button again, and the minute
display flickers. Press buttons to adjust the minute setting. Press button to exit the
timer ON/OFF setting. The following example shows the heat pump set to turn on at 8:30 every
morning, and turn off at 23:30 every night
TIMER TIMER
TIMER
TIMERTIMER
TIMER
TIMER
8.2h Setting of Timer 2, Ring Main Water Supply Flow and Return Line
Press for 5s to adjust the hours and minutes setting. The ON symbol flickers. Press again,
the hour display flickers. Press the button to adjust the setting of the hour. Press button
again, the minute display flickers. Press buttons to adjust the minutes. Press
button again and the hour and timer OFF symbol flickers. Press again and the hour display
flickers, press button to adjust the hours. Press button again and the minute display
flickers. Press buttons to adjust the minutes. Then press button to exit the timer ON/OFF
setting. The following example shows the ring main water supply flow and return line set to turn on
at 8:30 every morning and turn off at 23:30 every night.
TIMER TIMER
TIMER
TIMER
TIMER
TIMER
TIMER
ELECELEC
ELECELEC
ELECELEC
ELECELEC ELECELEC ELECELEC ELECELEC ELECELEC ELECELEC
CLOCK
CLOCK
CLOCK
CLOCK
CLOCK
AIR TO WATER HEAT PUMP WATER HEATERAIR TO WATER HEAT PUMP WATER HEATER