8.12.98 Gigaset 2060isdn, Inland: I_KAP00.FM5 s A30853-X210-B101-1-19 Gigaset 2060isdn Cordless Digital DECT Telephone System for EURO-ISDN Basic Access 8 mobile units can be connected User Guide 2 corded terminals can be connected Direct dialing in Important: Read this User Guide and the safety instructions before using this equipment.
Gigaset 2060isdn, Inland: I_KAP00.FM5 8.12.98 Getting started Getting started Installation steps for the Gigaset 2060isdn 1. Please read the safety instructions before starting (➔ page 8). 2. Install the base station (➔ page 9). 3. Insert the battery in the mobile unit; charge the battery if necessary (see the User Guide for your mobile unit). 4. Register the mobile unit with the base station (➔ page 11). Your Gigaset 2060isdn is now ready for use. Preparations for using the ISDN functions 1.
Gigaset 2060isdn, Inland: I_KAP00.FM5 8.12.98 A30853-X210-B101-1-19 Overviews Overviews Standard mobile unit, 2000S Legend Rear view Front view 1. Loudspeaker 2. Display 1 3. Speed dial key 4. Save key 2 15 3 4 5 6 5. Internal key 6. On-hook key 7. 14 13 7 16 9. Signal key 10. Microphone 11. ON/OFF/LOCK key Carry clip 8 9 Keypad 8. Star key 12. Pound key 13. Off-hook key 12 14. Number redial key 11 15. Ringer speaker 16.
Gigaset 2060isdn, Inland: I_KAP00.FM5 8.12.98 A30853-X210-B101-1-19 Overviews Base station, Gigaset 2060isdn Front view A B C Rear view B C E D Legend Front Rear A Registration button: For registering mobile users B Corded device with internal user number 0 C Corded device with internal user number 9 – D Socket for Euro-ISDN basic access E Socket for AC power adapter C39280-Z4-C65 – lights up to indicate base station is ready for use flashes while registration is in progress.
8.12.98 ISDN2060.IVZ Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Contents Getting started ............................................................................................................................. 2 Overviews ..................................................................................................................................... 3 Safety instructions .......................................................................................................................
ISDN2060.IVZ 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Contents Activating internal call forwarding ................................................................................................ 44 Deactivating internal call forwarding ............................................................................................ 44 Activating external automatic callback ...........................................................................................
Contact partners ........................................................................................................................... 93 Frequently asked questions ...................................................................................................... 94 Glossary ...................................................................................................................................... 98 Quick-reference guide, comfort mobile unit .............................................
I_KAP01.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Safety instructions Safety instructions Warning For your personal safety and protection, never use the base station or mobile unit in the bathroom or other wet environment. The devices are not spray-proof. ● Corded devices (telephone, fax, intercom ....) with exposed metal components may carry unacceptably high voltages for short periods of time, for example during thunderstorms. Do not touch these components.
I_KAP01.FM5 8.12.
I_KAP01.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Installation Connecting the base station Place the base station on a convenient worktop and proceed as follows: 1. Insert the Mini-Western plug of the telephone cable (ISDN cable) into the socket marked “L1” (underside of the base station, see ➀ in illustration below). 2. Insert the Mini-Western plug of the AC power adapter cable into the socket marked “$” (underside of base station, see ➁ in illustration below). 3.
Gigaset 2060isdn, Inland: I_KAP01.FM5 8.12.98 A30853-X210-B101-1-19 Installation Registering the Gigaset 2000C comfort mobile unit A mobile unit has to be ready for operation before you can use it with a base station. See the section entitled “Installation” in the User Guide supplied with your Gigaset 2000C. Each mobile unit has to be registered at the base station. The registration procedure for the Gigaset 1000C is described on the next page.
Gigaset 2060isdn, Inland: I_KAP01.FM5 8.12.98 A30853-X210-B101-1-19 Installation You can register your comfort mobile unit at a maximum of six base stations. You can register a maximum of 8 mobile units at a base station. If you start the registration procedure and 8 mobile units are already registered, the message “No free internal No.” appears in the display when you enter the system code. For details on the procedure for unregistering mobile units, ➔ page 60.
8.12.98 Gigaset 2060isdn, Inland: I_KAP01.FM5 A30853-X210-B101-1-19 Installation 3. Then back to the mobile unit 1…8 x OK Key in the internal number you want to assign to the mobile unit. Confirm your choice of internal number. This concludes the registration procedure and a message to this effect appears in the display, for example “Unit registered with internal No. 2”. ● You can register your comfort mobile unit at a maximum of six base stations.
Gigaset 2060isdn, Inland: I_KAP01.FM5 8.12.98 A30853-X210-B101-1-19 Installation Saving multiple subscriber numbers If you rent a point-to-multipoint connection from your network provider you have 3 multiple subscriber numbers at your disposal (MSN, also ➔ page 17 and Glossary, ➔ page 98). The procedure for saving these numbers in your Gigaset 2060isdn is described below. You can then use the ring allocation function (➔ page 15) to assign a multiple subscriber number (MSN) to each mobile unit or device.
Gigaset 2060isdn, Inland: I_KAP01.FM5 8.12.98 A30853-X210-B101-1-19 Installation Ring allocation Ring allocation is the function which enables you to define the user and MSN at which incoming calls are signalled or to which calls are directed. Ž .t Service t MSN n The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”).
I_KAP01.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Installation Tips on where to install the base station If you use corded telephones, it is advisable to space telephone and base station as far apart as possible in order to avoid the possibility of interference (due to technical reasons) on the telephone line.
I_KAP01.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Installation Connection options: base station The default operating mode is “point-to-multipoint access” . The procedure for changing the operating mode to “point-to-point” is described on ➔ page 24. Important information about Euro-ISDN Your ISDN system Gigaset 2060isdn supports two types of access. Types of connection ● Point-to-multipoint You can connect and operate one or more devices if you have an access of this type.
I_KAP01.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Installation Features The ISDN features that you can obtain from your network provider and utilize with your Gigaset 2060isdn are listed below. See the glossary (➔ page 98) for more details on the individual services.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Operation with comfort mobile unit Operation with comfort mobile unit Using the menus See the Gigaset 2000C User Guide for detailed instructions on how to use the menus. Conventions used in this User Guide Icons are employed in this User Guide to show how you navigate through the menus and submenus in order to select a function.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Operation with comfort mobile unit Example: “External consultation in external call” .t Ext. consultat’n • You have an external call in progress. Set up the external consultation call. . Call up the menu again and Resume Conference Macro Internal Speaker volume Telephone book Keypad on u NEXT .t Resume x OK choose a function. Select “Resume” from the menu if you want to resume your original call.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Operation with comfort mobile unit Example illustrating the menu hierarchy Idle state . . a Main menu Telephone lock Macro Babyphone . Select station Settings Service Z a OK Service menu ______________ Cancel call park Forwarding on List of calls . Sel. call enable a Anonym. call Unregister NEXT OK System settings Menu for system settings Keypad on Duration/units _____________ Call barring Change sys. code .
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Basic settings Basic settings Entering/changing the system code For the sake of security you should enter your own, custom, four-digit system code. This code prevents unauthorized changes to your settings and the registration of further mobile units without your permission. You must make all your entries from a mobile unit. The default system code is “0000”. You must make all your entries from a mobile unit.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Basic settings Setting point-to-multipoint Point to multipoint is the default access mode of your Gigaset 2060isdn. Use the procedure described here to configure the point-to-multipoint mode and define operation as local or multicell (in other words mobile units configured for use with one or more base stations).
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Basic settings Setting point-to-point You can use this mode with your Gigaset 2060isdn, but you must obtain the point-to-point access from your network provider, who also provides the requisite network terminator. When configured in this way your Gigaset 2060isdn is compatible only with a point-to-point access installed by your network provider. Ž .t Service The comfort mobile unit is idle.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Basic settings Suppressing phone-number display Your Gigaset 2060isdn allows you to suppress display of your phone number on the call partner’s telephone in two cases. Select “Anonym. call” if you do not want your phone number displayed when you place calls. Select “Anonym. answer” if you do not want your phone number displayed when you answer incoming calls. Ž .t Service The comfort mobile unit is idle.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Basic settings Activating/deactivating call waiting per user If call waiting is activated for one or more internal users and both channels are busy, a call-waiting tone draws attention to the next incoming call. You have the choice of terminating the ongoing call and accepting the waiting call (➔ page 26) or rejecting the waiting call. You must obtain the corresponding service from your network provider in order to use this function.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Basic settings Administrating the list of calls Calls which do not complete (no connection because busy, no answer) are automatically logged in a list of calls. The list contains up to 10 entries with phone numbers (no repeats) of calls switched via the ISDN exchange. Activating/deactivating display You can activate or deactivate display of the list. Display is activated by default. Ž The comfort mobile unit is idle.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Incoming calls Incoming calls Answering/terminating a call An incoming call (external, internal) is signaled audibly by the ringer and visually on the display of the mobile unit. Deactivating the ringer u RING OFF Press to deactivate the ringer. With the ringer off you can still answer a call at any time when the ringer icon is visible in the display.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Incoming calls Call pickup Within your call group (➔ page 56), you can pick up a call that has not yet been switched through to your telephone. The preconditions are call pickup activated (➔ page 25) and group call defined as ring allocation.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Incoming calls Call pickup from answering machine You can pick up a call that the answering machine has already accepted if the answering machine is entered in your call group. u x c EXT. Press the off-hook key Press if automatic line seizure is deactivated for this internal number (➔ page 26). MSNs are available for line seizure if they were entered (➔ page 14). Pick up the call.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Incoming calls Tracing a call (call intercept/MCID) You can trace a call to its source. You must obtain this service from your network provider and activate it, as otherwise the function is rejected and the message “Ident. not possible” issued. You can use this function in the following situations: c .t Intercept on ● A call is in progress. ● Ringer sounds: you press the off-hook key but the caller has already hung up.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Outgoing calls Outgoing calls Dialing external numbers with the keypad Once base station and comfort mobile unit are in operation, you can generally telephone right away with a mobile unit switched ON. c o u Press the off-hook key. Key in the phone number. The user answers and you conduct your external call. or EXT. Press if automatic line seizure is deactivated for this internal number (➔ page 26).
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Outgoing calls Viewing/dialing from list of calls Calls which do not complete (no connection because busy, no answer) are automatically logged in a list of calls. Phone numbers are not repeated in the list, even if the user attempt a call more than once. The list enables you to call back to someone who tried to call you but failed.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Outgoing calls Dialing internal numbers Calling an internal user If your configuration consists of multiple internal users (mobile units, devices) you can make internal calls. There are no telephone charges for internal calls. x INT o Press the “Internal” softkey and enter the number of the internal user you want to reach (0 to 9). The internal user is called.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Outgoing calls Activating “Anonymous call” for a single call This function enables you to prevent your phone number being displayed for a single call which you are about to make (if you have obtained the “case-by-case suppression of phone number” service from your network provider). Ž .t Service The comfort mobile unit is idle. t Meaning: see footnote t Anonym.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Call in progress Call in progress Holding a call You can place a call on hold, for example if you want time to examine a document before proceeding. Holding an internal call: • .t Internal x You are conducting an internal call. t Meaning: see footnote The call with the internal user is placed on hold. Press the softkey RESUME or R Press this key to cancel the hold and resume the call.
8.12.98 I_KAP03.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Call in progress Accessing answering machines/using telephone services Once you have set up a connection you can use the keypad of the mobile unit to access an answering machine or voice mailbox, for example, or use network-provider services such as a paging system. Without clearing down the call, you switch the keypad to DTMF dialing (“Temp. tone”) as described below. You can then use the keypad to enter the requisite information.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Call in progress Mute function If you want to prevent your call partner in an external call hearing you (for example if you want to consult someone in privacy), you can temporarily mute the mobile unit. t Meaning: see footnote .t Mute The call partner can no longer hear you. You can consult someone in privacy. Mute off: .t MICR. ON The call partner can hear you again. You can switch the mute function on and off as often as you wish.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Switching functions Switching functions Internal consultation/call transfer You can use your system to conduct internal consultation calls and transfer an external call to another internal user. Starting an internal consultation: x • INT @... 9 or : You are conducting an external call. Press the softkey. Enter the internal number of the user you want to call. Press the star key to call all internal users at once.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Switching functions Terminating the external consultation call and continuing the first external call: t Meaning: see footnote .t Resume You can continue your call with the first external user. or a Press this key or return the mobile unit to the charging unit. You receive a recall which you answer, thus resuming the original call.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Switching functions Ending toggle mode: t Meaning: see footnote .t Resume You can continue your call with the first external user. or a Press this key or return the mobile unit to the charging unit. You receive a recall which you answer, thus resuming the original call. You can toggle between an internal call and an external consultation call in the same way.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Switching functions Parking an external call You can park a call under a parking code and unpark it again under the same code at another telephone, such as a mobile unit. A call can be parked for up to three minutes. If you park a call you can unpark it only at the same pointto-multipoint access (Glossary, ➔ page 98).
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Switching functions t Ext./direct External calls are forwarded immediately (e.g. vacation). t Ext./busy External calls are forwarded if user dialed is busy (e.g. to secretary’s phone) t Ext./timeout External calls are forwarded after a certain number of rings (e.g. after working hours, to private phone).
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Switching functions Deactivating all external call forwarding The comfort mobile unit is idle. .t Service t Meaning: see footnote t Forwarding off The message “All forwarding canceled” appears in the display for 2 seconds by way of confirmation. Activating internal call forwarding You can use this function to forward external calls to another internal user.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Switching functions Activating external automatic callback If you attempt to place an external call but the party you call is busy, you can activate “automatic callback” and replace the handset. You will be called back automatically as soon as the number you dialed is free. The CALLBCK .softkey appears automatically if the automatic callback service is available from your network provider.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Call charges, call duration Call charges, call duration Displaying call charges/call duration You can check the total accrued call charges and the charge for the most recent call at each mobile unit. The total accrued charge is the sum of the charges for calls placed from the mobile unit in question. For details on setting the call charge factor, ➔ page 47.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Call charges, call duration Activating/deactivating display of call duration or charges/setting call charge factor Your Gigaset 2060isdn can display either the telephone time units or call charges or the duration of the call. Callduration display is active by default. If you need call charges displayed or logged, you must obtain the appropriate call data logging function from your network provider.
I_KAP03.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Call charges, call duration t Charge redisplay Activate/deactivate display of charge for most recent call (Call-charge display must be activated.) If this function is activated the charge for the most recent call is displayed as soon as the trunk is seized for a call. Practical in the catering trade, for example, because the charge for a call placed by a guest can be checked right away.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Locks Locks Lock for outgoing calls (system lock)/emergency phone numbers You can use the system lock to prevent your base station being used for outgoing calls. Incoming calls can be answered. Exception: Emergency phone numbers can be called even when the system lock is active. You can define and save a maximum of four emergency phone numbers, each consisting of up to 16 digits. Ž .t Service The comfort mobile unit is idle.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Locks t Lock int2 Select the internal user (for example “Lock int2”) to whom the function will apply. This is the menu for defining lock numbers. The options at your disposal are as follows: t Lock on Activate/deactivate call barring by lock numbers. t Lock No. list Check/change lock numbers. t New entry Add a new lock number. When you select “Lock on”, the message “call barr. Nos. for int2 activated” is displayed briefly.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 Locks Ž .t Service The comfort mobile unit is idle. t Meaning: see footnote t Sel. call enable This is the menu for blocking unwanted calls. The options at your disposal are as follows: t Enable ring Activate/deactivate unwanted call blocking. t Phone No. list Check/change phone numbers for wanted calls. t New entry Add new phone number for wanted calls. All incoming calls are blocked if you do not define a number.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 Locks Ž .t Service t Internal user 52 The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”). t System settings t Device data t Access rights Select the internal user for whom you want to define access rights.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings System settings Setting the connection configuration for cordless internal users You can define the types of device that can be used on the system’s subscriber line circuits. Cordless terminating devices can be mobile units or cordless devices such as the Gigaset 1000TAE. The default setting for users of this type is “mobile unit”. Ž t Meaning: see footnote t System settings t Device data .
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings Activating/deactivating permanent DTMF dialing You can permanently activate tone dialing on connection in order to avoid the necessity of switching temporarily to DTMF for using telephone services or accessing answering machines (➔ page 37). Ž .t Service u NEXT The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”).
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings Reinitializing the base station You can reinitialize the base station - restore default settings, in other words - for example if you are no longer sure precisely which changes have been made. For the sake of simplicity, however, not all system parameters are reset when you reinitialize.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings The access rights defined for internal users who receive external calls must be “incoming only” or higher (➔ page 51). You can enter a maximum of 10 users, of which 8 can be mobile units, in the list for collective call or the group list for call forwarding no answer. A user conducting an internal or external call receives the call waiting tone (also ➔ page 26).
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings Setting/changing ring allocation for point-to-multipoint access If you have a point-to-multipoint access, you have to save external phone numbers (multiple subscribe numbers, MSNs, ➔ page 14) before you proceed to ring allocation.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings Example: External phone No. Call group 1 Call group 2 12345678 2, 3, 5 1, 7 When an external call is incoming for MSN 12345678, the users with internal numbers 2, 3 and 5 are called simultaneously, before signalling is extended to the users with internal numbers 2, 3, 5, 1 and 7.
8.12.98 Gigaset 2060isdn, Inland: I_KAP03.FM5 A30853-X210-B101-1-19 System settings Setting/changing ring allocation for point-to-point access If you have a point-to-point access ring allocation is set automatically when you assign the internal user numbers to the system number. You may be unavailable under certain circumstances, for example if your mobile unit is temporarily out of range of the base station, so you can use call forwarding to determine who will be called.
Gigaset 2060isdn, Inland: I_KAP03.FM5 8.12.98 A30853-X210-B101-1-19 System settings Unregistering a mobile unit You can unregister each mobile unit using either the mobile unit itself or any other mobile unit. Ž The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”). t Meaning: see footnote t Unregister .t Service The list of internal numbers of the registered internal users is displayed.
8.12.98 I_KAP03A.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with other mobile units Operation with other mobile units Gigaset 1000C All the Gigaset 2060isdn functions are at your disposal with the Gigaset 1000C, except for those listed below.
I_KAP03A.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with other mobile units Basic settings Register mobile unit Mobile unit h (off) h (on) and together Save multiple subscriber number (MSN) B # 1 SC*) O # # B Set point-to-multipoint (local operation) B # 1 SC*) O # * 1 0 / 1B Set point-to-point B # 1 SC*) O # * 2 SC*) #
I_KAP03A.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with other mobile units Incoming calls Answer call/terminate call Ext. ring c Call pickup External ring c B R Call pickup from answering machine Answering machine is a – at mobile unit:c B R Answer call waiting Call...B R Reject call waiting Call...B # 9 2 B Trace call (intercept/MCID) External call...B # 4 9 B conduct call...
I_KAP03A.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with other mobile units Switching functions Internal consultation/call transfer Ext. call... I consultation call External consultation Call... R consultation call Toggle Three-party conference a transfer or press R to resume press R to resume Consultation call... I # call... I # consultation call..... press a to terminate Consultation call...
I_KAP03A.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with other mobile units Call charges, call duration Call charge and call duration display off B # 1 SC*) 9 6 0 B call duration on / call charge on B # 1 SC*) 9 6 1 / 2 B Set charge factor B # 8 2 SC*) B Display/delete charge totals B # 8 3 SC*)
I_KAP03A.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with other mobile units System settings Set device type Cordless user (1-8) B # 1 SC*) O * 0 O (int. No.) (1,2,3,4,6,7)** Corded user (0) B # 1 SC*) O * 0 O (int. No.) B # 1 SC*) O * 0 O (int. No.) (0,2,3,4,6,7)**) Corded user (9) (0,2,3,4,5,6,7)**) Set internal collective call B # 1 SC*) O * 5
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Operation with supplementary devices Connecting corded devices Sockets (see illustration, ➔ page 17) The Gigaset 2060isdn base station has two telephone sockets (B and C) for connecting corded devices.
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Setting the device type “Telephone” is the default device type for corded supplementary devices. You should connect a modem or fax machine to socket 0 by preference, and if you connect a door intercom you must use socket 9. Ž The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”). t System settings t Device data .
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices ● Socket C (bottom), internal number 9: max. 9 600 baud Outgoing calls General The procedures described below apply to a corded telephone connected to the base station. You can operate other supplementary devices such as a fax machine, videotex decoder or modem in the same way, provided they have a handset or a line seize key and a keypad for dialing.
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Activating “anonymous call” for a single call This function enables you to prevent your phone number being displayed for a single call which you are about to make (if you have obtained the “case-by-case suppression of phone number” service from your network provider). c 7 4 6 7 0 o Lift the handset. Press these keys in succession.
8.12.98 Gigaset 2060isdn, Inland: I_KAP04.FM5 A30853-X210-B101-1-19 Operation with supplementary devices Incoming calls Call pickup/pickup from answering machine You can pick up an external ringing call even if the call has not been signaled at your telephone or has already been answered by the answering machine. This situation can occur in the case of a group call, for example, when the call is ringing at the members of the first group (➔ page 58 ).
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Switching functions Setting internal call forwarding You can forward external calls intended for you to another internal user. You can forward calls only to a user who does not have call forwarding active. c 7 9 1 0 ... 9 1 ... 9 a Lift the handset. Press these keys in succession to activate internal call forwarding.
8.12.98 Gigaset 2060isdn, Inland: I_KAP04.FM5 A30853-X210-B101-1-19 Operation with supplementary devices Consultation call/call transfer As well as internal consultations, your ISDN system also enables you to conduct external consultation calls, for example with an external business partner. Invariably, you press the keys º 9 9 in succession to start an internal consultation call and the keys º 9 0 to start an external consultation call.
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Starting an external consultation call: b º 9 0 o You are conducting an external call. Press these keys in succession to place the call on hold and seize the ISDN trunk line. Enter the phone number of the external user. The user answers. You conduct your call with the external user. Terminating an external consultation call º 8 Press. The original user is reconnected.
8.12.98 Gigaset 2060isdn, Inland: I_KAP04.FM5 A30853-X210-B101-1-19 Operation with supplementary devices Toggling with a telephone set to DTMF dialing b º 5 º º a You are conducting a consultation call. Press to toggle to the original call. Press to toggle back to the consultation call. Press to toggle back to the original call, and so on. Replace the handset to disconnect from the consultation partner. You are automatically recalled. You can resume your original call.
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with supplementary devices Deactivating external automatic callback Automatic callback is active. c 7 4 8 7 a Lift the handset. Press these keys in succession and replace the handset. External automatic callback is deactivated. Parking an external connection You can park a call under a parking code and unpark it again under the same code at another telephone, such as a mobile unit.
8.12.98 I_KAP04.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Operation with door intercoms Operation with door intercoms Examples of how to connect door intercoms via TFE This example illustrates how the Gigaset 2060isdn can be connected to various types of entrance telephone via door interfaces with the aid of the Siemens door-intercom adapter (TFE). Door-intercom adapters are available from retailers.
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with door intercoms For details of ring allocation of the door intercom, ➔ page 79. For details of connection to the door intercom, ➔ page 80. Examples of how to connect door intercoms via TFE This example illustrates how the Gigaset 2060isdn can be connected to various types of entrance telephone with the aid of the Siemens door-intercom adapter (TFE/V).
8.12.98 Gigaset 2060isdn, Inland: I_KAP04.FM5 A30853-X210-B101-1-19 Operation with door intercoms SIEDLE TLM 511 RITTO 5760 Grothe TS 6216 There are also certain changes which apply to the various entrance telephones: Entrance telephone Changes in intercom SIEDLE TLM 511/01 Open jumpers 1, 3 and 4. Disconnect loudspeaker wire from pin “bl” and connect to “12”.
Gigaset 2060isdn, Inland: I_KAP04.FM5 8.12.98 A30853-X210-B101-1-19 Operation with door intercoms Connection to the entrance telephone The entrance telephone must be connected to the supplementary-device socket assigned internal number 9, otherwise it will not work. Note that only those internal users who are entered in ring allocation for the door intercom (➔ page 79) can use this function. Connection to comfort mobile unit A call from the entrance telephone rings (3 short tones).
I_KAP05.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Multicell system Multicell system Step-by-step procedure Follow the procedure described below step by step in order to incorporate your Gigaset 2060isdn in a multicell system. Preparations 1. Read the general remarks (➔ page 82). 2. Connect multiple base stations to a common point-to-multipoint access (➔ page 10). 3. Register the mobile units at the other base stations, using the same internal numbers in each case (➔ page 11) 4.
I_KAP05.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Multicell system General remarks When the Gigaset 2060isdn is incorporated in a multicell system you can use your mobile unit at any of several base stations. By positioning the Gigaset 2060isdn base stations strategically you can extend the area in which you can use your mobile unit. ● You can register and use your mobile unit at a maximum of six Gigaset 2060isdn base stations.
Gigaset 2060isdn, Inland: I_KAP05.FM5 8.12.98 A30853-X210-B101-1-19 Multicell system If you set up a multicell Gigaset 2060isdn system you can use your mobile unit at any base station in the system. You can register and operate your mobile units at a maximum of six Gigaset 2060isdn base stations.
Gigaset 2060isdn, Inland: I_KAP05.FM5 8.12.
8.12.98 Gigaset 2060isdn, Inland: I_KAP05.FM5 A30853-X210-B101-1-19 Multicell system Setting multicell operation Ž The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”). t Meaning: see footnote t System settings t Configuration .t Service t Point to MP After selecting and then confirming “Point to MP” and thus activating this setting, select: t multicell op For operation with multiple base stations.
Gigaset 2060isdn, Inland: I_KAP05.FM5 8.12.98 A30853-X210-B101-1-19 Multicell system Setting automatic base station selection If you have a configuration with more than one base station you can determine the base station to which your mobile unit connects. You need automatic base station selection for multicell operation. Ž .t Select station The comfort mobile unit is idle.
Gigaset 2060isdn, Inland: I_KAP05.FM5 8.12.98 A30853-X210-B101-1-19 Multicell system Enable/disable base station change with call in progress You can register and operate the mobile units at different base stations from the Siemens Gigaset family, including non-ISDN base stations. In order to prevent a call being switched to a non-ISDN base station, you must define the base stations to which switching is permitted. Ž t Meaning: see footnote t Station settings .
Gigaset 2060isdn, Inland: I_KAP05.FM5 8.12.98 A30853-X210-B101-1-19 Operation behind a private branch exchange Operation behind a private branch exchange General remarks You can connect your Gigaset 2060isdn to and operate it via private branch exchanges connecting to Euro-ISDN accesses with DSS1 protocol. As a rule, point-to-multipoint is the access mode of preference at the subscriber accesses of the private branch exchanges.
8.12.98 Gigaset 2060isdn, Inland: I_KAP05.FM5 A30853-X210-B101-1-19 Operation behind a private branch exchange Enabling/disabling call transfer Call transfer is enabled by default. Ž .t Service u NEXT The comfort mobile unit is idle. You will be prompted to enter the system code in the course of this procedure (default code: “0000”). t Meaning: see footnote t System settings t Device data x OK t Transfer call Disable or enable the function, as applicable, and confirm your choice.
Gigaset 2060isdn, Inland: I_KAP06.FM5 8.12.98 A30853-X210-B101-1-19 General notes General notes Ring signals External call beeep beeep 0.8s tone Internal call 4s pause beeep beeep beeep 0.5s tone 0.5s tone 0.8s pause Call from the entrance telephone Recall/callback beep 4.2s pause beep beep 3 x 0.3s tone and 0.3s pause beeep beeep 0.8s tone 0.8s pause Acoustic signals Call tone beeep beeep 0.8s tone 2s pause Dial tone, internal beep beep beep 3 x 0.2s tone and 0.
I_KAP06.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 General notes System upkeep Wipe the mobile units and base station clean with a damp cloth or antistatic cloth. Never use a dry cloth (risk of electrostatic buildup). Technical data Standards I-CTR3, CTR 6, CTR 10 Number of channels 120 duplex channels Frequencies 1.88 GHz to 1.
I_KAP06.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 General notes Troubleshooting A problem is not necessarily caused by a technical defect. You can save yourself time and money by tackling some of the simpler problems yourself. This troubleshooting chart will help you do just that.
I_KAP06.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 General notes Warranty Siemens AG guarantees this device for 6 months as of the date of purchase from the retailer. Keep your receipts as proof of purchase. Under the terms of this warranty Siemens AG shall, at no cost, rectify all defects resulting from material flaws or manufacturing defects. Siemens AG shall, at its own discretion, repair or replace the defective device.
Gigaset 2060isdn, Inland: I_KAP07.FM5 8.12.98 A30853-X210-B101-1-19 Frequently asked questions Frequently asked questions 1. Setting the multiple subscriber number (MSN) for outgoing calls Can I set a specific multiple subscriber number (MSN) for outgoing calls? ● Yes, when you program ring allocation. Ring allocation starts with MSN 1 and goes through to MSN 10. Once an internal number is assigned an MSN for the first time in ring allocation, this MSN is subsequently used for outgoing calls.
I_KAP07.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Frequently asked questions ● The intercept function enables you to trace callers who have suppressed display of their phone number, malicious callers, etc. You can set up an intercept while that call is in progress or up to 40 seconds after the call has been terminated, but the need for an intercept must be verifiable on the part of the network provider.
I_KAP07.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Frequently asked questions support a dial pause. Dial tone: Devices which recognize a dial tone are usually set for a continuous tone (Deusche Telekom). Private branch exchanges, however, use another tone (intermittent tone) to distinguish between external and internal dialing. If this causes problems, particularly with fax machines, the device’s dial-tone detector must be switched off.
I_KAP07.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Frequently asked questions ● Once the voice-call connection has been set up the subsequent characters are sent via the D channel unless temporary DTMF dialing is activated, in which case the digits are sent as DTMF characters in the B channel. This switchover is required for accessing external devices such as answering machines, etc. 14.
I_KAP08.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Glossary Glossary Access rights By setting access rights you determine whether your telephone can be used ● for outgoing and incoming external and internal calls (full trunk access rights), ● for incoming external calls and internal calls only (incoming-only access rights), ● for internal calls only (internal-only access rights).
I_KAP08.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Glossary DPS Pulse dialing; slow analog dialing procedure. The individual digits are dialed by means of pulses DSS1 Digital Signaling System No. 1 for the Euro ISN protocol DTMF Dual tone multifrequency dialing; fast analog dialing procedure. The individual digits are dialed by means of dual tones Emergency phone number You can save a maximum of four emergency phone numbers in the Gigaset 2060isdn.
I_KAP08.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Glossary You can park a call for a maximum of 3 minutes. PBX Private Branch Exchange PCM Pulse Code Modulation; Digital transmission procedure; an analog signal is mapped onto digital values. PIN Personal identification Number in the mobile unit, for locking the mobile unit and protecting your custom settings. System code Base station identification number, for locking the base station and protecting system settings.
Gigaset 2060isdn, Inland: I_KAP09.FM5 8.12.98 A30853-X210-B101-1-19 Quick-reference guide, comfort mobile unit Switch mobile unit ON/OFF/LOCKED Quick-reference guide, comfort mobile unit h Mobile unit is: ON OFF LOCKED Action press and hold: press and release: press and hold: press and hold: press and release: Mobile unit is: OFF LOCKED ON OFF ON Register mobile unit*) t Register .t Settings t Station (1–6) Press Register button (LED) in base station. Follow the prompts on the display.
Gigaset 2060isdn, Inland: I_KAP09.FM5 8.12.98 A30853-X210-B101-1-19 Quick-reference guide, comfort mobile unit Redial (last external number dialed) xz x DIAL Press softkeys in succession. The phone number is automatically redialed. View callback list/dial from list*) c .t Set sys funct. t Call list t Display entry Select the number you want to call back and set up the connection. Park an external call*) .t Service • You are conducting an external call.
8.12.98 Gigaset 2060isdn, Inland: I_KAP09.FM5 A30853-X210-B101-1-19 Quick-reference guide, supplementary device Dial external phone number Quick-reference guide, supplementary device c0 o Lift the handset, seize the external trunk line and enter the phone number. Dial internal phone number c9 o Lift the handset, press digit for internal dial and enter the internal number. Internal collective call c6 Lift the handset. All internal uses are called.
Gigaset 2060isdn, Inland: I_KAP09.FM5 8.12.98 A30853-X210-B101-1-19 Quick-reference guide, supplementary device Toggle (telephone with DTMF dialing) º5 º .... º Three-party conference º 7 Press these keys in succession. Press this key as often as necessary to switch back and forth between the two calls. If two connections are set up press these keys in succession to initiate a three-party conference.
8.12.98 I_KAP10.FM5 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Special accessories Special accessories Gigaset 2000C All the accessories described below are available from your retailer. The Gigaset 2000C has an easily readable 4-line display for excellent user guidance. Features which boost user convenience include: ● Telephone book for approx. 100 entries of names and phone numbers. ● Backlit display/babyphone ● Redial last 5 different phone numbers.
I_KAP10.FM5 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Special accessories Gigaset 2000T The Gigaset 2000T is a cordless desktop telephone. It has the same features as the Gigaset 2000C, plus the emergency call function. Color: graphite gray Gigaset 1000TAE The cordless adapter for operating corded devices via base stations of the Gigaset 1000/2000 family.
isdn2060.six 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Stichwortverzeichnis Index A a/b services ................................................... 95 AC supply base station ............................................ 91 access ........................................................... 51 operating mode ...................................... 17 point-to-multipoint .................................. 17 point-to-point .......................................... 17 access rights ...........
isdn2060.six 8.12.98 Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Index dial-tone detector .......................................... 96 direct dialing in ........................................18, 98 display LED ............................................ 11, 12, 99 phone number ................................18, 100 display call duration ....................................... 46 DTMF dialing ...........................................91, 99 DTMF, permanent ......................................
8.12.98 isdn2060.six Gigaset 2060isdn, Inland: A30853-X210-B101-1-19 Index private branch exchange ............................... 88 R radio cell ........................................................ 84 radio range .................................................... 91 range .......................................................16, 91 range warning tone ....................................... 90 recall ........................................................73, 74 register button .................
8.12.98 BACKPAGE.FM Gigaset 2010, Inland: A30852-X911-B301-4-19 Issued by Private Communication Systems Group Hofmannstraße 51, D-81359 München © Siemens AG 1997. All rights reserved. Subject to availability. Right of modification reserved. Siemens Aktiengesellschaft Reference No.