User Guide Cordless Digital Telephone 2060isdn

Installation

I_KAP01.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

Registering the Gigaset 2000C comfort mobile unit

A mobile unit has to be ready for operation before you can

use it with a base station. See the section entitled “Instal-

lation” in the User Guide supplied with your Gigaset

2000C.

Each mobile unit has to be registered at the base station.

The registration procedure for the Gigaset 1000C is de-

scribed on the next page.

Initial registration

The following prompt is displayed if the mobile unit is not

registered at a base station:

((

Press the Register button on the base station

Use a pointed instrument (such as a pencil or ball-point

pen) to press the button. The Register button starts flash-

ing.

Your mobile unit is registered and ready for use.

Press to confirm. Enter the 4-digit system code of the

base station and confirm this entry as well (default code:

“0000”). The mobile unit searches for the base station

waiting to accept registration. The message “Registering

with Station 1” appears on the display.

The unassigned internal numbers are listed as soon as

the connection between the base station and mobile unit

is established.

… 8

Key in the internal number you want to assign to the mo-

bile unit. Use to correct your entry if necessary.

Confirm your choice of internal number. This concludes

the registration procedure and a message to this effect

appears in the display, for example “Unit registered with

internal No. 1”.